Greater Manchester · England
Bath Repair in Heaton Norris
Bath repair in Heaton Norris without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Chips on the rim or sides
- Impact holes in acrylic
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Fix dripping taps early to stop staining and limescale
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
- Protect the bath with a towel when doing jobs nearby
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
About our bath repair in Heaton Norris
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. If you’re dealing with a kit repair that didn’t last and deep scratches in acrylic, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Heaton Norris (SK4, SK1, SK5)
- County
- Greater Manchester
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Heaton Norris?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it deals only with the damage in a single visit. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Heaton Norris. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- No extra charge for your area
- We leave the room as we found it
- Typically one visit, start to finish
- No need to remove anything
Read our prices page and resurfacing vs replacement cost guide.
Honest limits
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Where we work around Heaton Norris
Heaton Norris is about 1 mile north of Stockport, in Greater Manchester. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in all 72 towns and villages in Greater Manchester, from the larger towns to small villages.
Jobs in SK4, SK1 and SK5 are booked in the same way as anywhere else. That includes homes on Denby Lane, Gower Road and Roman Road. With the A6188 close by, Heaton Norris is easy for our technicians to reach. Neighbouring places we cover include Heaton Chapel (1 mile west), Portwood (1 mile east), Stockport (1 mile south), South Reddish (1 mile north) and Heaton Moor (1 mile west). Within a short drive, we also cover Manchester (5 miles north-west), Wythenshawe (5 miles west), Northern Quarter (5 miles north-west), Old Trafford (5 miles north-west), Chinatown (5 miles north-west) and Ancoats (5 miles north-west).
What’s near Heaton Norris
Our customers here include homes close to St Anne's Roman Catholic High School, All Saints Church of England Primary School Stockport and The Hope Inn. Heaton Norris’s nearest station is Stockport station, roughly 0.8 miles south. Other landmarks nearby include Alexandra Hospital (2.5 miles south-west) and Stockport Rural District (2.2 miles east). Green spaces nearby include Unicorn Grocery and Werneth Low.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
The process
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the day after, the bath is ready to use.
How to prepare
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Keep children and pets away from the room on the day
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
Work for landlords and builders
For anyone letting property in or around Heaton Norris, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Nearby places to Heaton Norris
More services for Heaton Norris
Questions from Heaton Norris
What happens after I send photos?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Which areas do you work in?
We work UK-wide. Prices do not change with location.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Do you need bath repair in Heaton Norris?
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
Send us a picture if you notice any of these:
- Impact holes in acrylic
- Rust spots around the plughole
- Cracks in an acrylic bath
- A failed DIY repair that is discoloured or lifting
Before you book anyone
- Aftercare advice
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
