Kirklees · England
Bath chip & crack repair in Helme, Kirklees
Problem with your bath in Helme? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Snagging damage from a refit
- Cracks in an acrylic bath

How we handle bath repair in Helme
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, typically in a single visit. Whether it’s damage beneath the taps and scratches you can feel with a fingernail, we can help.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Where
- Helme (HD9, HD7)
- Region
- Kirklees
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026

When to call us in Helme
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
If you can see any of these, send us a picture:
- Deep scratches in acrylic
- Rusty patches near the plughole
- Holes from dropped items
- Chips caused by builders
What to look for in a quote
- A fixed price, and whether VAT is included
- How to care for the finish
- How the room is protected while they work
- Who turns up on the day
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Landlord and trade work in Helme
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
FAQs for Helme
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Something went through my bath. Can it be fixed?
Typically. Send us a picture of the hole and one from under the bath if you can.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Can you quote from photos?
Generally, yes. Clear pictures let us give you a fixed price without visiting.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
How long before I can use the bath?
Most baths can be used the next day. We confirm the time before we leave.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Have new chips seen to early
- Put a towel in the bath if you’re working above it
- Fix dripping taps early to stop staining and limescale
- Don’t scrub with anything abrasive
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Covering Helme
Helme is about 1 mile north of Meltham, in Kirklees. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover all 189 towns and villages across Kirklees, from the larger towns to small villages. Our nearest city page is Manchester, about 18 miles away.
All of HD9 and HD7 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Helme Lane, Dunnock Road and Harrison Lane. Neighbouring places we cover include Blackmoorfoot (1 mile north), Holt Head (1 mile west), South Crosland (1 mile east), Linthwaite (1 mile north) and Slaithwaite (2 miles north-west). We also work in nearby towns such as Huddersfield (4 miles north-east), Dewsbury (11 miles north-east), Batley (11 miles north-east), Mirfield (8 miles north-east), Liversedge (10 miles north-east) and Cleckheaton (10 miles north-east).
What’s near Helme
Locally, our jobs take us to homes close to Christ Church, The Bulls Head pub and Helme Church of England Academy. Helme’s nearest station is Slaithwaite station, roughly 1.9 miles north-west. Further afield, we also cover the area around Piazza Centre (4 miles north-east) and David Brown Tractor Museum (0.9 miles south-east). Green spaces nearby include Oldfield Hill.
Repair or replace in Helme?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why Helme clients choose us
- Rooms protected and left tidy
- Work done at your home or business
- Everything repaired in place
- Honest advice, even when it means no job
See our pricing or guide to resurfacing and replacement costs.
How it works
We begin by going over the job with you. Then the area is sheeted and masked and we start. It normally takes a morning or an afternoon, and we’ll keep you posted as we go.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Tell us about parking, stairs or access
- Make sure the area is dry
- Have a window or extractor fan available
Get a quote
Send us a photo of the damage and a wider shot of the entire item, and tell us you are in Helme, and we will come back with a fixed quote.
Related advice
Nearby places to Helme
Other services in Helme
What affects the price in Helme
Repairs from £95. You will not pay by the hour. The price is based on:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- The material
- How many areas need work
Our prices are the same across the UK, so there is no premium for Helme. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
You can generally get a fixed price without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
If you’re in Helme and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.

