Devon · England
Bath Repair in Hennock
Local bath repair for Hennock: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Chips under the taps
- Impact holes in acrylic
About our bath repair in Hennock
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Whether it’s a cracked acrylic bath and a kit repair that didn’t last, we can help, on whirlpool & spa baths, roll-top & freestanding and pressed steel enamel alike.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Hennock (TQ13)
- Region
- Devon
- Cover
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Let us know if it has been repaired before
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Read more
Places near Hennock
Other services in Hennock
What bath repair costs
Repairs from £95. We price every job individually, from your pictures. The main factors are:
- Whether we combine several jobs
- The material
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
The price reflects the work involved, not where you live. You’ll see the full price before you book.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Details of any past repairs
- A coin beside the damage so we can judge size
- A wider photo showing the entire bath
- A close-up of the damage, in focus
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Our work in Hennock
Hennock is about 5 miles north-west of Kingsteignton, in Devon. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our repair technicians cover 586 places across Devon.
Postcode districts we cover here: TQ13. That includes homes on Church Road and Bell Lane. Nearby, we also work in Trusham (2 miles north-east), Hawkmoor Parke (2 miles west), Chudleigh (3 miles east), Christow (3 miles north) and Bridford (4 miles north). Further out, we also cover Exeter (10 miles north-east), Exmouth (11 miles east), Newton Abbot (6 miles south), Teignmouth (8 miles south-east), Kingsteignton (5 miles south-east) and Dawlish (8 miles east).
What’s near Hennock
Locally, our jobs take us to homes close to Church of St Mary, Palk Arms and Hennock Community Primary School, among other places. Further afield, we also cover the area around Bovey Tracey Hospital (1.6 miles south-west) and House of Marbles (2.6 miles south-west). The countryside around Hennock includes Haldon Hill and Chudleigh Knighton Heath.
Why repair rather than replace?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Usually one visit, start to finish
- Honest advice, even when it means no job
- Every repair guaranteed for a year
- Work done at your home or business
Take a look at our pricing and guide to resurfacing and replacement costs.
Landlords, agents and businesses in Hennock
We work for landlords, letting agents and housing providers in Hennock as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Common problems we fix in Hennock
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Look out for any of the following:
- An old repair that has yellowed or come loose
- Impact holes in acrylic
- Scuffs and scratches in the surface
- A chip where the taps sit
What to look for in a quote
- Whether there are any call-out or travel charges
- What preparation is included
- How the colour is matched
- How long it needs to cure
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Honest limits
To be straight with you, there are a few things a repair will not fix:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
FAQs for Hennock
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your photos and we’ll quote them together.
How much does bath repair cost in Hennock?
Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
About our accreditations · Every repair comes with a one-year guarantee.
