Barnsley · England
Bath Repair for High Hoyland homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in High Hoyland and across Barnsley. Free, fixed quotes from your pictures.
- Repairs from £95
- Rust by the waste and overflow
- A failed DIY repair that is discoloured or lifting
Bath repair in High Hoyland, done in place
A typical bath repair is a few hours’ work, and you can normally bathe again the following day. You won’t need a plumber or tiler, because the bath doesn’t move. If you are dealing with a cracked acrylic bath and chips on the rim or sides, we can usually put it right, on whirlpool & spa baths, cast iron enamel and roll-top & freestanding alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- High Hoyland (S75)
- Area hub
- Barnsley
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- No need to remove anything
- Rooms protected and left tidy
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
Read our prices page and resurfacing vs replacement cost guide.
What we’re called out for in High Hoyland
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
Signs it’s time to call us include:
- Rust spots around the plughole
- Deep scratches in acrylic
- A cracked acrylic bath
- An old repair that has yellowed or come loose
Questions to ask before booking
- How changes to the job are handled
- How soon you can use it again
- How your room will be protected
- Whether cleaning and preparation are in the price
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The process
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. It normally takes two to three hours for most chips.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know about parking or access
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Related advice
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, pictures and access details.
If you manage property in High Hoyland, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Places near High Hoyland
What else we do in High Hoyland
Your questions about bath repair in High Hoyland
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can you redo someone else’s repair?
Normally, yes. The old repair comes out first, so let us know about it.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
How long does the repair take to cure?
Usually within a day, though it depends on what we have done.
How much does bath repair cost in High Hoyland?
Repairs from £95. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
What areas do you cover?
All of Barnsley, and the rest of the UK. There is no extra charge for travel.
Prices and what affects them
Repairs from £95. We give every job a fixed price from pictures. This is what makes a difference:
- How many areas need work
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- Unusual colours or finishes
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- One picture of the whole bath
- Something in shot to show the size
- Any earlier repairs or coatings
- Any details about the material
To get a price, send a couple of pictures through our quote form or ring us. We’ll say straight away whether it can be repaired.
What we can’t put right
It helps to know what we cannot do:
- Wear across the whole surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in High Hoyland
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
High Hoyland and nearby
High Hoyland is about 5 miles north-west of Barnsley, in Barnsley. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. High Hoyland is one of 94 places in Barnsley where we work. Our nearest city page is Leeds, about 15 miles away.
Our visits in S75 work the same way as everywhere else we cover. We regularly work on streets such as Upper Field Lane and High Hoyland Lane. Other places close to High Hoyland include Cawthorne (1 mile south), Kexbrough (2 miles east), Woolley Grange (2 miles east), Darton (2 miles east) and Barugh (3 miles south-east). We also work in nearby towns such as Barnsley (5 miles south-east), Wombwell (9 miles south-east), Wath upon Dearne (11 miles south-east), Shaw Lands (5 miles south-east), Hoyland (8 miles south-east) and Worsbrough (6 miles south-east).
Around High Hoyland
In High Hoyland, that means homes near Church of All Hallows, Darton College and Cannon Hall Park and the streets around them. For rail, the closest station is Darton station, about 2.3 miles east of the centre. Other landmarks nearby include Barnsley Hospital (4.1 miles south-east) and De Morgan Museum (1.2 miles south).
About our accreditations · Every repair comes with a one-year guarantee.
