Suffolk · England
Bath chip & crack repair in High Street, Suffolk
Bath repair in High Street without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Repairs from £95
- A hole punched through by something heavy
- Rusty patches near the plughole
Our work in High Street
High Street is about 5 miles south-west of Beccles, in Suffolk. Customers in High Street get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. High Street is one of 731 towns and villages in Suffolk where we work.
All of NR34 and NR35 is covered, from the main roads to the quietest streets. If you are just outside High Street, we cover Ilketshall St Margaret (1 mile north-west), St Margaret South Elmham (3 miles west), Mettingham (3 miles north), Bungay (4 miles north-west) and Wainford (4 miles north). Within a short drive, we also cover Lowestoft (11 miles north-east), Beccles (5 miles north-east), Diss (15 miles west), Halesworth (4 miles south), Leiston (14 miles south) and Carlton Colville (10 miles east).
Landmarks near High Street
Locally, our jobs take us to homes close to Church of St Margaret. The closest station to High Street is Brampton (Suffolk) station, roughly 2.9 miles east. Other landmarks nearby include Wainford Rural District (1.8 miles north) and Ilketshall St John (2.3 miles north). Not far away are Winks Meadow and Homersfield Lake.
Bath repair in High Street without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, typically in a single visit. If you are dealing with holes from dropped items and rusty patches near the plughole, we can usually put it right, on acrylic, pressed steel enamel and whirlpool & spa baths alike.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- High Street (NR34, NR35)
- Region
- Suffolk
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near High Street
Other services in High Street
High Street questions
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Will the repair show?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Why repair rather than replace?
Swapping a damaged bath for a new one usually means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why High Street clients choose us
- No extra charge for your area
- A year’s guarantee on all work
- Normally one visit, start to finish
- Nothing taken out or refitted
See our prices page and resurfacing vs replacement cost guide.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
How to look after the repair
Aftercare is simple, and it makes a real difference:
- If an acrylic bath flexes, have its feet adjusted
- Cover the bath during DIY or decorating
- Rinse it down after each bath
- Fix dripping taps early to stop staining and limescale
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Prices and what affects them
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Previous DIY repairs that have to come out
- How much damage there is
- The type of damage
- The colour and finish to match
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
Two or three clear pictures are normally enough. It helps if you send:
- Any details about the material
- A coin or ruler next to the damage for scale
- Details of any past repairs
- Good light, ideally daylight, without flash glare
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Honest limits
To be straight with you, there are a few things a repair will not fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the entire surface, which needs re-enamelling
- A steel bath rusted through
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
How it works
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for a few hours, depending on the damage from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
Ask for a price
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
Work for landlords and builders
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Repairs by material
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
