Essex · England
Bath chip & crack repair in Higham, Essex
Fixed-price bath repair in Higham and the surrounding area, usually in one visit and guaranteed for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- A hole punched through by something heavy
How we price bath repair
Repairs from £95. You won’t pay by the hour. The price is based on:
- Any earlier repairs that need removing first
- How much damage there is
- The material and finish
- The colour and finish to match
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
Before you send photos, a few simple things make all the difference:
- Details of any past repairs
- A photo taken from further back
- Natural light rather than flash
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
How we handle bath repair in Higham
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s chips under the taps and chips on the rim or sides, we can normally put it right, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Higham (CO7)
- County
- Essex
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes two to three hours for most chips. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
About Higham
Higham is about 7 miles north-east of Colchester, in Essex. Across the CO7 area, we carry out the work at your property. Higham is one of 644 places in Essex where we work. We work right across the region, from Higham to London (56 miles away).
Here we cover the CO7 postcode area. We also cover the places around Higham: Stratford St Mary (1 mile south-east), Thorington Street (1 mile west), Holton St Mary (2 miles north-east), Withermarsh Green (2 miles north-west) and Dedham (2 miles south-east). Within a short drive, we also cover Colchester (7 miles south-west), Clacton-on-Sea (15 miles south-east), Harwich (13 miles east), Camulodunum (8 miles south-west), Halstead (14 miles west) and Greenstead (6 miles south).
Near you in Higham
Typical jobs here are in homes near The Swan Inn, Church of St Mary and Stratford St Mary Primary School and the streets around them. Higham’s nearest station is Manningtree station, roughly 4.2 miles south-east of the centre. Other landmarks nearby include Severalls Hospital (5.2 miles south-west) and Little Wenham Castle (3.6 miles north-east). Green spaces nearby include Cattawade Marshes.
When we would advise against a repair
A repair is not always the answer, and we’d rather say so up front. Repairs will not solve:
- Wear across the entire surface, which needs re-enamelling
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
FAQs for Higham
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and we will quote them together.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Do you cover the entire of Essex?
All of Essex, and the rest of the UK. Travel is included in the price.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Higham
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- Work done at your home or business
Read our prices page or bath cost comparison.
Nearby places to Higham
What else we do in Higham
Looking after it afterwards
It’s all simple stuff:
- If an acrylic bath flexes, have its feet adjusted
- Put a towel in the bath if you are working above it
- Have new chips seen to early
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Do you need bath repair in Higham?
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.
Get in touch if you’ve noticed any of these:
- Chips on the rim or sides
- A chip where the taps sit
- A failed DIY repair that’s discoloured or lifting
- Rust by the waste and overflow
What your quote should include
- How your room will be protected
- What prep work is covered
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
