Essex · England
Bath & shower resealing (mastic) in Higham, Essex
Our repair technicians come to Higham for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, with a one-year guarantee.
- Missing sealant behind the taps
- Old sealant that looks dirty
- Gaps in the seal
Bath resealing in Higham without replacing anything
A fresh seal protects your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. Our technicians work on baths, basins & vanity units and shower trays & enclosures, and common reasons people contact us are silicone coming away from the tiles and leaks at the edges.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Higham (CO7)
- County
- Essex
- Warranty
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Higham: your questions answered
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and we’ll quote them together.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we will plan for it.
How do I get a price for bath resealing in Higham?
Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Is there any odour?
Expect a mild smell while we are working, which fades afterwards.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
When can I use the bath after resealing?
We will give you the curing time.
How long does resealing take?
Most reseals take about two hours. Leave it to cure before use.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Prices and what affects them
We give every job a fixed quote from pictures. This is what makes a difference:
- The material
- Previous DIY repairs that have to come out
- Access to the area
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed quote
We price nearly every job from pictures. This is what to send:
- Natural light rather than flash
- Whether it’s been repaired or coated before
- Any details about the material
- Where you are, by postcode
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Nearby places to Higham
What else we do in Higham
Is resealing worth it?
Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why choose Surface Doctor in Higham
- We leave the room as we found it
- CHAS and Constructionline accredited
- No extra charge for your area
- One-year guarantee on every repair
Read our pricing.
When to call us in Higham
Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.
Keep an eye out for any of the following:
- A messy previous reseal
- Gaps by the taps
- Leaks at the edges
- Gaps in the seal
Before booking anyone
- What happens if the damage is worse than the photos show
- How the colour is matched
- If travel is included in the price
- How your room will be protected
What we can’t put right
In fairness, there are a few things a repair won’t fix:
- Very wide gaps that need a trim
- Hidden water damage
- Hollow or loose tiles
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Basins & vanity units
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
- Wet rooms
Higham and the surrounding area
Higham is about 7 miles north-east of Colchester, in Essex. Across the CO7 area, we come to you. Our repair technicians cover 644 places in Essex. Our jobs stretch from Higham to London (about 56 miles away).
Jobs in CO7 are booked in the same way as anywhere else. Other places close to Higham include Stratford St Mary (1 mile south-east), Thorington Street (1 mile west), Holton St Mary (2 miles north-east), Withermarsh Green (2 miles north-west) and Dedham (2 miles south-east). Within a short drive, we also cover Colchester (7 miles south-west), Clacton-on-Sea (15 miles south-east), Harwich (13 miles east), Camulodunum (8 miles south-west), Halstead (14 miles west) and Greenstead (6 miles south).
Landmarks near Higham
Around Higham, we work in homes near The Swan Inn, Church of St Mary and Stratford St Mary Primary School, among other places. The nearest railway station is Manningtree station, roughly 4.2 miles south-east of the centre. Well-known places in the area include Severalls Hospital (5.2 miles south-west) and Little Wenham Castle (3.6 miles north-east). Open spaces near Higham include Cattawade Marshes.
Looking after it afterwards
Once the work has cured, treat it gently:
- Replace the seal when mould sets in
- Run the extractor fan during and after showers
- Keep the joints dry
- Give the seal a regular clean
Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.
Black mould in sealant is not just unsightly. Resealing early keeps water out of the walls and floor.
Landlord and trade work in Higham
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
What happens on the day
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take around two hours, and the room is left clean and tidy.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Preparing for the visit
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
How to get a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
