Highland · Scotland
Bath Repair in Hill of Fearn
Damaged bath in Hill of Fearn? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips on the rim or sides
- Impact holes in acrylic
Bath repair in Hill of Fearn without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include a chipped rim or side and snagging damage from a refit, across pressed steel enamel, cast iron enamel and whirlpool & spa baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Hill of Fearn (IV20)
- County
- Highland
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Hill of Fearn
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
What you get with us
- One visit for most repairs
- CHAS and Constructionline accredited
- Work done at your home or business
- A year’s guarantee on all work
Read our prices page or bath cost comparison.
When we’d advise against a repair
To be straight with you, there are a few things a repair will not fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
- Cracks in parts of an acrylic bath we can’t get to from below
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Common questions in Hill of Fearn
Do you cover Hill of Fearn?
Yes, we do. Technicians travel to Hill of Fearn from across the region, with no extra charge for travel.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
When can I have a bath again?
Typically the day after. We’ll tell you the exact curing time when we finish.
Are there extra charges for Hill of Fearn?
Travel is included in the price, with the same prices everywhere we work.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Highland and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Give the bath a quick rinse after use
- Don’t leave razors or cans standing in the bath
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
How it works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes two to three hours for most chips. Before we leave, we explain the curing time and the aftercare.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Keep a parking space free if you can
- Tell us about parking, stairs or access
- Make sure the area is dry
Getting a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
What we are called out for in Hill of Fearn
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
You may need us if you’ve spotted any of these:
- Impact holes in acrylic
- A kit repair that didn’t last
- Rust by the waste and overflow
- Deep scratches in acrylic
Before booking anyone
- When it can be used again
- The length of the guarantee and what it covers
- What protection goes down before work starts
- What preparation is included
Also near Hill of Fearn
Also in Hill of Fearn
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
What bath repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- What kind of damage it is
- Unusual colours or finishes
- Doing more than one item at once
- Whether old repairs or coatings need taking off
Our prices are the same across the UK, with no extra for Hill of Fearn. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Daylight if possible, and no flash reflection
- Any details about the material
- Where you are, by postcode
- Whether it’s been repaired or coated before
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Hill of Fearn and nearby
Hill of Fearn is about 14 miles north of Nairn, in Highland. Whether you are in the middle of Hill of Fearn or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 253 towns and villages in Highland.
Every address in IV20 is within our area, from the main roads to the quietest streets. Whether you live on Finlayson Street, Rhynie Road and Main Road or a nearby road, we can come to you. Neighbouring places we cover include Fearn (1 mile south-east), Loans of Tullich (2 miles south-east), Arabella (2 miles south-west), Balintore (2 miles south-east) and Shandwick (2 miles south-east). We also work in nearby towns such as Nairn (14 miles south), Tain (4 miles north-west), Alness (12 miles south-west), Dornoch (8 miles north), Invergordon (9 miles south-west) and Fortrose (15 miles south-west). If you are somewhere remote, call first so we can plan the visit.
What’s near Hill of Fearn
Our customers here include homes close to Fearn. Hill of Fearn’s nearest station is Fearn station, roughly 1.1 miles west. Well-known places in the area include Milntown Castle (4.5 miles south-west). Open spaces near Hill of Fearn include Loch Eye.
About our accreditations · Every repair comes with a one-year guarantee.
