Lincolnshire · England

Bath Repair for Hilldyke homes

Local bath repair for Hilldyke: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Rust by the waste and overflow
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Hilldyke?

Bath repair in Hilldyke without replacing anything

Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Typical jobs include scratches you can feel with a fingernail and an old repair that has yellowed or come loose, in roll-top & freestanding, cast iron enamel and pressed steel enamel.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Location
Hilldyke (PE22)
Area hub
Lincolnshire
Warranty
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

What bath repair costs

Prices start from £95. You won’t pay by the hour. The price is based on:

  • The material and finish
  • Doing more than one item at once
  • Any earlier repairs that need removing first
  • Where the damage is and how we get to it

A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

How to get a fixed quote

The better the pictures, the more accurate the price. Here’s what helps:

  • The material, if you know it
  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area
  • A wider photo showing the entire bath

To get a price, send two or three pictures through our quote form or ring us. We will say right away whether it can be repaired.

FAQs for Hilldyke

Will I be able to see the repair?

We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Can you repair something that is been repaired before?

In most cases. The old repair comes out first.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Hilldyke.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

Do you cover Hilldyke?

Yes. We work across the UK and travel to Hilldyke. Send pictures and we’ll quote, or call 0345 017 0787.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

What we cannot put right

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Wear across the whole surface, which needs re-enamelling
  • A steel bath rusted through
  • Flexing caused by a failed cradle or loose feet

If in doubt, send pictures and we’ll say what we think before booking.

Surfaces we repair

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic

Repairing versus replacing in Hilldyke

Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.

Why choose Surface Doctor in Hilldyke

  • Accredited with CHAS, Constructionline and SafeContractor
  • One price list for the entire UK
  • One visit for most repairs
  • Colours mixed by hand to suit your surface

Read our pricing and guide to resurfacing and replacement costs.

Landlord and trade work in Hilldyke

Landlords, letting agents and housing providers in Hilldyke use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Covering Hilldyke

Hilldyke is about 3 miles north-east of Boston, in Lincolnshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Our repair technicians cover all 732 towns and villages in Lincolnshire, from the larger towns to small villages.

Jobs in PE22 are booked in the same way as anywhere else. Jobs here include addresses on Boston Road, Hurn Road and Sibsey Road and the roads around them. We also cover the places around Hilldyke: Cowbridge (1 mile south-west), High Ferry (1 mile north), Fishtoft Drove (1 mile north-west), Sibsey (2 miles north) and Frithville (3 miles north-west). Larger places within reach include Boston (3 miles south-west), Holbeach (14 miles south), Horncastle (14 miles north), Woodhall Spa (13 miles north-west), Pinchbeck (15 miles south-west) and Witham (3 miles south-west).

What’s near Hilldyke

Our clients here include homes close to Boston High School. The closest station to Hilldyke is Boston station, about 2.8 miles south-west of the centre. Other landmarks nearby include Pilgrim Hospital (1.6 miles south). Not far away are Freiston Shore RSPB reserve.

Map of Hilldyke © OpenStreetMap contributors

DIY kit or professional repair?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

Common problems we fix in Hilldyke

A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.

Common reasons people in Hilldyke contact us are:

  • A failed DIY repair that is discoloured or lifting
  • A chip where the taps sit
  • Snagging damage from a refit
  • A cracked acrylic bath

Comparing quotes

  • What happens if they find more damage
  • How the colour is matched
  • What prep work is covered
  • How your room will be protected

10 questions to ask before booking

How the visit works

We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes a few hours. Before we leave, we explain the curing time and the aftercare.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, normally by the next day, the bath is ready to use.

Before we arrive

  • Keep pets and children out of the room while we work
  • Let us know about parking or access
  • Have a window or extractor fan available

Get a quote

Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Hilldyke, and we’ll come back with a fixed quote.

Get a fixed quote

Related advice

Looking after it afterwards

Most damage we see is avoidable. A few tips:

  • Clean with warm water and a mild detergent
  • Avoid scourers, wire wool and gritty cream cleaners
  • Don’t leave razors or cans standing in the bath
  • If an acrylic bath flexes, have its feet adjusted

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.