Lincolnshire · England
Bath Resealing for Hilldyke homes
Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Hilldyke. Free, fixed quotes from your pictures.
- Silicone smeared on tiles
- Gaps in the seal
- Old sealant that looks dirty
Bath resealing in Hilldyke, done in place
A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. Whether it’s unsealed corners and stained silicone, we can normally put it right, on basins & vanity units, baths and wet rooms alike.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Location
- Hilldyke (PE22)
- County
- Lincolnshire
- Guarantee
- 12 months on all our work
- Quote
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath or shower is made of matters
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Our work in Hilldyke
Hilldyke is about 3 miles north-east of Boston, in Lincolnshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 732 places in Lincolnshire.
Postcode districts we cover here: PE22. Streets in the area include Boston Road, Hurn Road and Sibsey Road, and we cover them all. Other places close to Hilldyke include Cowbridge (1 mile south-west), High Ferry (1 mile north), Fishtoft Drove (1 mile north-west), Sibsey (2 miles north) and Frithville (3 miles north-west). Larger places within reach include Boston (3 miles south-west), Holbeach (14 miles south), Horncastle (14 miles north), Woodhall Spa (13 miles north-west), Pinchbeck (15 miles south-west) and Witham (3 miles south-west).
Landmarks near Hilldyke
Locally, our jobs take us to homes close to Boston High School and the streets around them. The nearest railway station is Boston station, roughly 2.8 miles south-west. Well-known places in the area include Pilgrim Hospital (1.6 miles south). For a walk, there’s Freiston Shore RSPB reserve.
How the visit works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes about two hours for a bath, and we finish with a tidy-up and a look at the finished work together.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
Ask for a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Advice
Do you need bath resealing in Hilldyke?
Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
Contact us if you’ve noticed any of these:
- Stained silicone
- Mould you cannot clean out
- Damp near the bath
- Gaps in the seal
Questions to ask before booking
- What protection goes down before work starts
- What the guarantee covers, and for how long
- Aftercare advice
- How soon you can use it again
Places near Hilldyke
Also in Hilldyke
Is resealing worth it?
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Hilldyke clients choose us
- One-year guarantee on every repair
- One visit for most repairs
- A fixed quote before booking
- CHAS and Constructionline accredited
Read our full price list.
Hilldyke questions
Can you reseal over the old silicone?
Never over old. It’s removed, cleaned off and the joint dried first.
How long will it take?
A bath or shower usually takes a couple of hours. It then needs time to cure.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we will plan for it.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
For landlords and businesses
We work for landlords, letting agents and housing providers in Hilldyke as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
If you manage property in Hilldyke, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
How we price bath resealing
We give every job a fixed quote from pictures. This is what makes a difference:
- The type of damage
- The material and finish
- The colour and finish to match
- How many areas need work
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
You can take the photos on your phone. Just ensure we can see:
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- The material, if you know it
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Keeping it looking good
To keep it looking its best for years:
- Reseal at the first sign of lifting
- Wipe the joints dry after use
- Clean the joints with a mild cleaner
- Open a window after bathing
Let it cure fully before using the bath or shower, normally about a day.
Black mould in sealant is not just unsightly. An early reseal keeps water where it belongs.
About our accreditations · Every repair comes with a one-year guarantee.
