South Lanarkshire · Scotland
Bath chip & crack repair in Hillhouse, South Lanarkshire
Bath repair for Hillhouse, without a refit. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- Chips under the taps
- A hole punched through by something heavy
How we handle bath repair in Hillhouse
A typical bath repair is a few hours’ work, and you can generally bathe again the next day. You will not need a plumber or tiler, because nothing is disconnected. If you’re dealing with cracks in an acrylic bath and chips caused by builders, we can usually put it right.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Hillhouse (ML3, G72)
- Area hub
- South Lanarkshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
FAQs for Hillhouse
Is a holed acrylic bath repairable?
Generally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Do you work in Hillhouse?
Yes, we do. We send a technician to Hillhouse for every job, and the price is the same as everywhere else.
How long does the repair take to cure?
Normally by the following day, though it depends on what we have done.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
How the visit works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes two to three hours for most chips. Before we leave, we explain the curing time and the aftercare.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
- Point us to the nearest place to park
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Advice
What affects the price in Hillhouse
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- How easy the damage is to reach
- The material and finish
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
We price nearly every job from photos. This is what to send:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- The material, if you know it
- One picture of the entire bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
When to call us in Hillhouse
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
The things clients normally mention when they call are:
- A chipped rim or side
- Deep scratches in acrylic
- Chips under the taps
- Rust by the waste and overflow
What your quote should include
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
- If travel is included in the price
- How to care for the finish
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. We charge the same wherever you are, with no extra for Hillhouse. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Hillhouse
- Repair technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing and resurfacing vs replacement cost guide.
Where we work around Hillhouse
Hillhouse is about 1 mile west of Hamilton, in South Lanarkshire. Whether you’re in the middle of Hillhouse or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Hillhouse is one of 139 places in South Lanarkshire we cover. You can also see our page for Glasgow, about 9 miles away.
We work across the ML3 and G72 postcode area and the streets around it. Streets in the area include Elie Road, Farm Road and Largo Lane. Close by, we cover Auchinraith (1 mile north), High Earnock (1 mile south), Burnbank (1 mile north-east), Laighstonehall (1 mile south-east) and Hamilton (1 mile east). We also work in nearby towns such as East Kilbride (4 miles west), Cambuslang (4 miles north-west), Uddingston (4 miles north), Larkhall (5 miles south-east), Carluke (10 miles east) and Rutherglen (6 miles north-west).
Near you in Hillhouse
In Hillhouse, that means homes near Iona Ridge Park, Hamilton and John Ogilvie High School. The nearest railway station is Hamilton West station, roughly 1.3 miles east of the centre. Other landmarks nearby include David Livingstone Centre (2 miles north) and Calderwood Castle (1.8 miles west). Open spaces near Hillhouse include Cathkin Braes and Strathclyde Loch.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What a repair cannot fix
A repair is not right for every job, for example:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
- Metal that has corroded all the way through
Send us pictures and we will tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Places near Hillhouse
Other services in Hillhouse
About our accreditations · Every repair comes with a one-year guarantee.
