Bury · England
Bath chip & crack repair in Holcombe, Bury
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Holcombe and across Bury. Free, fixed quotes from your photos.
- Repairs from £95
- Chips along the edge of the bath
- Rust by the waste and overflow
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Rinse it down after each bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- A dripping tap stains enamel, so fix it early
- Protect the bath with a towel when doing jobs nearby
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Bath repair in Holcombe without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s chips along the edge of the bath and damage done while the bathroom was being fitted, we can usually put it right, on roll-top & freestanding, cast iron enamel and acrylic alike.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Holcombe (BL8)
- County
- Bury
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Free fixed quotes from pictures
- Honest advice, even when it means no job
See our prices page or bath cost comparison.
Nearby places to Holcombe
Also in Holcombe
What a repair cannot fix
It helps to know what we can’t do too:
- A steel bath rusted through
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a few hours.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
- Let the surface dry out before the visit
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Related advice
Your questions about bath repair in Holcombe
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Will the price change on the day?
The price is fixed for what the pictures show. If there is more, we will tell you before starting.
How much does bath repair cost in Holcombe?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
What happens after I send photos?
We come back with a fixed quote. There’s no obligation to book.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Do you need bath repair in Holcombe?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.
Signs it’s time to call us include:
- Rust by the waste and overflow
- A failed DIY repair that is discoloured or lifting
- A hole punched through by something heavy
- Damage done while the bathroom was being fitted
Comparing quotes
- How long it needs to cure
- What happens if the damage is worse than the pictures show
- What protection goes down before work starts
- A fixed quote, and whether VAT is included
Landlord and trade work in Holcombe
We carry out planned and one-off repairs for housing associations and facilities teams in Bury and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Covering Holcombe
Holcombe is about 1 mile north-west of Ramsbottom, in Bury. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in 40 places in Bury. You can also see our page for Manchester, about 13 miles away.
Our visits in BL8 work the same way as everywhere else we cover. Local streets include Moor Road, Holcombe Village and Chapel Lane. We also cover the places around Holcombe: Ramsbottom (1 mile south-east), Stubbins (1 mile north-east), Brooksbottoms (1 mile south-east), Shuttleworth (1 mile north-east) and Chatterton (1 mile north-east). We also work in nearby towns such as Bury (4 miles south), Radcliffe (6 miles south), Prestwich (9 miles south), Whitefield (7 miles south), Besses o' th' Barn (7 miles south) and Elton (4 miles south).
What’s near Holcombe
In Holcombe, that means homes near Shoulder of Mutton pub, Emmanuel Church and Woodhey High School and the streets around them. Holcombe’s nearest station is Entwistle station, about 3.5 miles west. A little further out are Helmshore Mills Textile Museum (Higher Mill) (3 miles north) and Bury General Hospital (3.1 miles south-east). The countryside around Holcombe includes Hail Storm Hill.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
