Cambridgeshire · England
Bath chip & crack repair in Holme, Cambridgeshire
Bath repair in and around Holme: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Impact holes in acrylic
- Cracks in an acrylic bath
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the next day.
Preparing for the visit
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
Bath repair in Holme, done in place
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on cast iron enamel, roll-top & freestanding and whirlpool & spa baths, and people most frequently call us about a kit repair that didn’t last and a hole punched through by something heavy.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Holme (PE7)
- Region
- Cambridgeshire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Holme
More services for Holme
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Keep metal cans and razors off the surface
- Do not leave a fresh chip for long
- Give the bath a quick rinse after use
- Clean with warm water and a mild detergent
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Where we work around Holme
Holme is about 7 miles south of Peterborough, in Cambridgeshire. Wherever you are in the PE7 postcode area, we carry out the work at your property. We work in 371 places across Cambridgeshire. Our jobs stretch from Holme to London (about 68 miles away).
All of PE7 is within our area. You will find streets such as Station Road, Vicarage Close and Short Drove, all of which we cover. We also travel to Conington (2 miles south-west), Stilton (2 miles north-west), Glatton (3 miles south-west), Norman Cross (3 miles north-west) and Folksworth (3 miles north-west). We also work in nearby towns such as Huntingdon (10 miles south), St Ives (12 miles south-east), March (15 miles east), Whittlesey (8 miles north-east), Chatteris (12 miles east) and Godmanchester (12 miles south).
What’s near Holme
Typical jobs here are in homes near The Admiral Wells pub, Holme CofE Primary School and Parish Church of St Giles. A little further out are Bruces Castle Farm (2.1 miles south). For a walk, there is Great Fen Project.
Do you need bath repair in Holme?
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
Send us a photo if you notice any of these:
- Scuffs and scratches in the surface
- Damage beneath the taps
- A failed DIY repair that’s discoloured or lifting
- Cracks in an acrylic bath
What to look for in a quote
- If travel is included in the price
- Aftercare advice
- Whether cleaning and preparation are in the price
- Who will actually do the work
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
Your questions about bath repair in Holme
How long before I can use the bath?
Most baths can be used the next day. We confirm the time before we leave.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Something went through my bath. Can it be fixed?
Typically. Send us a picture of the hole and one from under the bath if you can.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
Do you cover the whole of Cambridgeshire?
We cover the entire UK, including Holme and the rest of Cambridgeshire. Just include your postcode and we’ll offer you dates.
Landlords, agents and businesses in Holme
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Cracks in acrylic we can’t reach from underneath
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we’ll tell you honestly.
Materials we work on in Holme
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- How many items we do on one visit
- How easy the damage is to reach
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- Something in shot to show the size
- A photo taken from further back
- One sharp close-up of the damage
- The material, if you know it
Email us pictures of the damage and a wider shot of the entire item, with your PE7 postcode, and we’ll come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
