Cambridgeshire · England
Bath re-enamelling & resurfacing in Holme, Cambridgeshire
Bath re-enamelling in and around Holme: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A period or roll-top bath worth keeping
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- How many areas need work
- The material and finish
- How easy the damage is to reach
- Whether we combine several jobs
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
If you are in Holme and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Bath re-enamelling at your home in Holme
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We work on cast iron baths, acrylic baths and basins & shower trays, and people most often call us about an outdated colour you’d like to change and thin, worn enamel in places.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Holme (PE7)
- Area hub
- Cambridgeshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Holme
Holme is about 7 miles south of Peterborough, in Cambridgeshire. Clients in Holme get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We work in 371 places across Cambridgeshire. Our nearest city page is London, about 68 miles away.
All of PE7 is covered. You’ll find streets such as Station Road, Vicarage Close and Short Drove, and we cover them all. We also cover the places around Holme: Conington (2 miles south-west), Stilton (2 miles north-west), Glatton (3 miles south-west), Norman Cross (3 miles north-west) and Folksworth (3 miles north-west). Larger places within reach include Huntingdon (10 miles south), St Ives (12 miles south-east), March (15 miles east), Whittlesey (8 miles north-east), Chatteris (12 miles east) and Godmanchester (12 miles south).
Near you in Holme
In Holme, that means homes near The Admiral Wells pub, Holme CofE Primary School and Parish Church of St Giles and the streets around them. Other landmarks nearby include Bruces Castle Farm (2.1 miles south). Green spaces nearby include Great Fen Project.
FAQs for Holme
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
Repairing versus replacing in Holme
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Prices start from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- We leave the room as we found it
- Repair technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- Colour-matched on site
Take a look at our full price list and bath cost comparison.
How it works
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the next day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
- Let us know about parking or access
Getting a price
Upload a photo of the damage and a wider shot of the entire item, and tell us you are in Holme, and we’ll come back with a fixed quote.
Advice
What else we do in Holme
Aftercare tips
Looking after the surface is easy:
- Use washing-up liquid and a soft cloth
- Avoid suction-cup mats
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Landlords, agents and businesses in Holme
We are used to working with agents and managing companies. Send the address, photos and access details.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
What we can’t put right
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
- Acrylic that moves when you stand in it
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
