Wokingham · England

Bath chip & crack repair in Holme Green, Wokingham

Bath repair for Holme Green, without a refit. Get a fixed price from your pictures, then we come to you.

  • Repairs from £95
  • Rusty patches near the plughole
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Holme Green

Bath repair at your home in Holme Green

We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. Common call-outs are for a hole punched through by something heavy and damage beneath the taps, in cast iron enamel, whirlpool & spa baths and acrylic.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Holme Green (RG40)
Area hub
Wokingham
Warranty
A year, on every repair
Quote
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

How we price bath repair

Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:

  • The colour and finish to match
  • The size and number of damaged areas
  • Whether we combine several jobs
  • The material

A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Quotes from your pictures

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • A photo taken from further back
  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • What it’s made of, if you know

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Our work in Holme Green

Holme Green is about 2 miles north of Crowthorne, in Wokingham. Jobs in Holme Green are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Holme Green is one of 35 towns and villages in Wokingham we cover. You can also see our page for London, about 32 miles away.

We work across RG40. Close by, we cover Gardeners Green (1 mile south-west), Barkham (3 miles west), California (3 miles south-west), Little Sandhurst (3 miles south) and Finchampstead (3 miles south-west). We also work in nearby towns such as Reading (8 miles north-west), Woodley (5 miles north-west), Earley (6 miles north-west), Lower Earley (5 miles north-west), Winnersh (4 miles north-west) and Newtown (7 miles north-west).

Near you in Holme Green

In Holme Green, that means homes near The Crooked Billet pub, Wixenford School and St Sebastian's Church and the streets around them. You’ll also find St Crispin's School (1 mile north-west) and Floreat Montague Park Primary School (0.6 miles north). Holme Green’s nearest station is Wokingham station, about 1.6 miles north-west. Further afield, we also cover the area around Pinewood Hospital (1.1 miles south-east) and The Lexicon (2.9 miles north-east). For a walk, there is Heath Lake and Holt Copse & Joel Park.

Map of Holme Green © OpenStreetMap contributors

Common problems we fix in Holme Green

Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

Common reasons people in Holme Green contact us are:

  • Deep scratches in acrylic
  • Chips caused by builders
  • Rusty patches near the plughole
  • An old repair that has yellowed or come loose

Comparing quotes

  • How soon you can use it again
  • The length of the guarantee and what it covers
  • Who turns up on the day
  • What preparation is included

How to compare quotes

How it works

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours, depending on the damage. If anything looks different from your photos, we will talk to you before going ahead.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, usually the following day.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Ensure the room can be ventilated
  • Plan for the room to be out of bounds to pets and children

How to get a price

For a price in Holme Green, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Send photos for a quote

Advice

What we can’t put right

A few problems are outside what a surface repair can do:

  • Wear across the whole surface, which needs re-enamelling
  • Water coming from the waste or taps rather than the bath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

If in doubt, send pictures and we will say what we think before booking.

Materials we work on in Holme Green

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic

Aftercare tips

Nothing complicated is needed, just a few sensible habits:

  • Put a towel in the bath if you’re working above it
  • Stick to mild cleaners and a soft cloth
  • Rinse it down after each bath
  • Avoid scourers, wire wool and gritty cream cleaners

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.

Your questions about bath repair in Holme Green

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit. The rest of the house is unaffected.

Can you repair a failed DIY repair?

Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.

Can you repair something that is been repaired before?

Yes, we often do. It can add a little time, which we include in the quote.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

What happens next?

We check the damage, the material and your postcode, then reply with a quote with dates.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

Can you repair a hole in a bath?

Generally. Send us a photo of the hole and one from under the bath if you can.

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

Repair or replace in Holme Green?

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Why Holme Green clients choose us

  • Dust sheets down, tidy finish
  • Normally one visit, start to finish
  • No extra charge for your area
  • Accredited with CHAS, Constructionline and SafeContractor

See our full price list and guide to resurfacing and replacement costs.

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.