Bath and North East Somerset · England
Bath chip & crack repair in Hook, Bath and North East Somerset
Bath repair in Hook without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- A cracked acrylic bath
- Rusty patches near the plughole
Common problems we fix in Hook
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
It’s worth getting a quote if you see:
- Impact holes in acrylic
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
- A chip where the taps sit
What your quote should include
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- How soon you can use it again
- Whether they match the colour on site
How we handle bath repair in Hook
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Our technicians work on whirlpool & spa baths, cast iron enamel and acrylic, and common reasons people contact us are rust spots around the plughole and a hole punched through by something heavy.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Hook (BA2)
- Area hub
- Bath and North East Somerset
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. It typically takes two to three hours for most chips, and you’re welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Make sure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
How to get a price
If you are in Hook and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
Nearby places to Hook
Also in Hook
Common questions in Hook
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we will quote them together.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Bath and North East Somerset.
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What affects the price in Hook
Repairs from £95. There is no charge for travel to Hook. The price depends on:
- Previous DIY repairs that have to come out
- The material and finish
- How many areas need work
- Doing more than one item at once
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
Two or three clear pictures are typically enough. It helps if you send:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
Email us photos of the damage and a wider shot of the whole item, with your BA2 postcode, and we will reply with a fixed price.
Our work in Hook
Hook is about 3 miles north of Midsomer Norton, in Bath and North East Somerset. We visit customers in Hook and nearby villages, so nothing has to leave your home. Hook is one of 136 towns and villages in Bath and North East Somerset where we work.
Here we cover the BA2 postcode area. Neighbouring places we cover include Meadgate West (1 mile south-east), Meadgate East (1 mile east), Timsbury (1 mile west), Camerton (1 mile south-east) and Tunley (1 mile north-east). Within a short drive, we also cover Bath (6 miles north-east), Keynsham (6 miles north), Bathwick (6 miles north-east), Walcot (7 miles north-east), Westmoreland (5 miles north-east) and Kingsmead (6 miles north-east).
Around Hook
Our customers here include homes close to Church of St Mary the Virgin, Camerton Inn and St Mary's CofE Primary School, among other places. Well-known places in the area include Paulton Memorial Hospital (2.3 miles south-west) and Oval enclosure (4.9 miles west). Open spaces near Hook include Stephen's Vale Nature Reserve and Hunstrete Lake.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Get a dripping tap fixed promptly
- Make sure an acrylic bath is firm underfoot
- Have new chips seen to early
- Clean with warm water and a mild detergent
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
What we cannot put right
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
- Cracks in parts of an acrylic bath we can’t get to from below
Send us photos and we will tell you honestly.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Why repair rather than replace?
A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Hook. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Free fixed quotes from pictures
- Work done at your home or business
- Everything repaired in place
- No extra charge for your area
Take a look at our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
