Somerset · England
Bath chip & crack repair in Horsington, Somerset
We travel to Horsington for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- A chipped rim or side

What we’re called out for in Horsington
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
The things clients typically mention when they call are:
- Chips caused by builders
- A cracked acrylic bath
- Damage beneath the taps
- An old repair that has yellowed or come loose
What your quote should include
- How the colour is matched
- What prep work is covered
- How the room is protected while they work
- How changes to the job are handled
Bath repair in Horsington, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. Common call-outs are for a failed DIY repair that’s discoloured or lifting and chips along the edge of the bath, on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding.
We stand behind the work with a one-year guarantee.

- Area
- Horsington (BA8)
- County
- Somerset
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
After the repair has cured, a few habits help it last:
- Get a dripping tap fixed promptly
- Make sure an acrylic bath is firm underfoot
- Clean with warm water and a mild detergent
- Do not leave a fresh chip for long
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Landlord and trade work in Horsington
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Horsington: your questions answered
How much does bath repair cost in Horsington?
Repairs from £95. Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Do you cover the entire of Somerset?
We work UK-wide. Our prices are the same everywhere.
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Horsington.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Will the repair show?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Horsington
- CHAS, Constructionline and SafeContractor accredited
- Usually one visit, start to finish
- No need to remove anything
- We come to you, anywhere in the UK
See our prices page and guide to resurfacing and replacement costs.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which typically takes two to three hours for most chips. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
How to get a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say right away if a repair is the right fix.
Read more
Nearby places to Horsington
Also in Horsington
What bath repair costs
Repairs from £95. There is no area surcharge for Horsington. The price reflects:
- Unusual colours or finishes
- The material
- How easy the damage is to reach
- Whether we combine several jobs
The price reflects the work involved, not your postcode. You will see the full price before you book, with nothing added on the day.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- Any details about the material
- Your postcode, so we can check dates
Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Horsington, and we’ll come back with a fixed quote.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Honest limits
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Leaking fittings, which need a plumber
- Wear across the whole surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
About Horsington
Horsington is about 11 miles north-east of Yeovil, in Somerset. Jobs in Horsington are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We cover 640 places in Somerset, from the larger towns to small villages.
We work across the BA8 postcode area. Whether you live on Lower Road, Rectory Lane and Houndsmill or a nearby road, we can come to you. If you are just outside Horsington, we cover South Cheriton (1 mile north-west), Abbas Combe (1 mile south-east), Combe Throop (1 mile south-east), North Cheriton (1 mile north-west) and Horsington Marsh (1 mile north-east). Within a short drive, we also cover Yeovil (11 miles south-west), Shepton Mallet (13 miles north-west), Wincanton (3 miles north), Somerton (14 miles west), Castle Cary (7 miles north-west) and Preston Plucknett (11 miles south-west).
Landmarks near Horsington
We visit homes around Church of St John the Baptist, Horsington Church School and The Half Moon Inn and the streets around them. For rail, the closest station is Templecombe station, about 0.9 miles south-east.
About our accreditations · Every repair comes with a one-year guarantee.

