Kent · England
Bath Repair in How Green
Bath repair across How Green and nearby, generally in one visit.
- Repairs from £95
- A chip where the taps sit
- A hole punched through by something heavy
Bath repair in How Green without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, usually in a single visit. We are often asked to fix an old repair that has yellowed or come loose and scuffs and scratches in the surface, on acrylic, pressed steel enamel and roll-top & freestanding.
Every repair comes with a one-year guarantee, wherever you are in Kent.
- Location
- How Green (TN8)
- Area hub
- Kent
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Aftercare is simple:
- Rinse it down after each bath
- Don’t leave razors or cans standing in the bath
- Cover the bath during DIY or decorating
- Keep abrasive pads and gritty cleaners away from the bath
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Where we work around How Green
How Green is about 7 miles south-west of Sevenoaks, in Kent. Anywhere in TN8, we carry out the work at your property. How Green is one of 922 towns and villages in Kent where we work. Our nearest city page is London, about 23 miles away.
Postcode districts we cover here: TN8. Streets in the area include Hever Road and How Green Lane. Nearby, we also work in Hever (1 mile south), Newtown (2 miles south), Markbeech (2 miles south), Chiddingstone Causeway (3 miles east) and Chiddingstone Hoath (3 miles south-east). Further out, we also cover Sevenoaks (7 miles north-east), Royal Tunbridge Wells (8 miles south-east), Tonbridge (7 miles east), Swanley (14 miles north), Kings Hill (14 miles east) and Paddock Wood (12 miles east).
Local landmarks in How Green
Typical jobs here are in homes near Hever Church of England Voluntary Aided Primary School, The Wheatsheaf Public House and Church of St Peter. For rail, the closest station is Hever station, roughly 1.3 miles south-west of the centre. Further afield, we also cover the area around Tandridge Priory (5.4 miles north-west) and Hever Castle (0.7 miles south).
Work for landlords and builders
Landlords, letting agents and housing providers in How Green use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When we would advise against a repair
Before you book, it’s worth knowing the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in How Green
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
What we are called out for in How Green
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
The most common problems we’re called about are:
- Chips caused by builders
- Holes from dropped items
- A cracked acrylic bath
- Damage beneath the taps
What your quote should include
- What prep work is covered
- How to look after the finish
- How soon you can use it again
- How the room is protected while they work
What else we do in How Green
Repairing versus replacing in How Green
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Prices start from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in How Green
- Typically one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- Same prices wherever you are
See our prices page or bath cost comparison.
How Green questions
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
Do you cover How Green?
Yes. We cover the entire UK and come to How Green. Send pictures and we will quote, or call 0345 017 0787.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
How the visit works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Clear the area around the damage
- Make sure the room can be ventilated
- Ensure the area is dry
Getting a price
To get a price, send a couple of pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
