Essex · England

Bath Repair in Howegreen

Chip and crack repairs to enamel, acrylic and cast iron baths in Howegreen, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • A chip where the taps sit
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Howegreen

What we can’t put right

Some jobs aren’t right for a repair, including:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Wear across the whole surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding

About our bath repair in Howegreen

Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, generally in a single visit. Our technicians work on cast iron enamel, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are damage beneath the taps and rust by the waste and overflow.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.

Location
Howegreen (CM3)
County
Essex
Warranty
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Common problems we fix in Howegreen

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.

It’s worth getting a quote if you see:

  • A cracked acrylic bath
  • Impact holes in acrylic
  • Rusty patches near the plughole
  • Scratches you can feel with a fingernail

What your quote should include

  • Whether the price covers travel
  • Whether they match the colour on site
  • How changes to the job are handled
  • How long the guarantee is and what it covers

Choosing a repair company

Should I try a DIY kit first?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Howegreen: your questions answered

How invisible is a bath repair?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

What happens after I send pictures?

We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.

Can pets and children be at home?

Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.

Can you redo an old repair?

Yes, we do this often. We strip it out, deal with any rust and repair it again.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Howegreen and the surrounding area

Howegreen is about 3 miles south of Maldon, in Essex. Across the CM3 area, we come to you. Howegreen is one of 644 places in Essex where we work. We work right across the region, from Howegreen to London (35 miles away).

Jobs in CM3 are booked in the same way as anywhere else. Close by, we cover Purleigh (1 mile north), Farther Howegreen (1 mile south-east), Great Canney (1 mile south), Rudley Green (1 mile north) and Cold Norton (1 mile south-east). We also work in nearby towns such as Chelmsford (8 miles north-west), Basildon (11 miles south-west), Braintree (14 miles north), Maldon (3 miles north), Canvey Island (12 miles south) and Billericay (11 miles west).

Around Howegreen

Our clients here include homes close to Purleigh Community Primary School, The Bell Public House and Parish Church of All Saints and the streets around them. For rail, the closest station is North Fambridge station, roughly 2.6 miles south-east. Not far away are Stow Maries Halt.

Map of Howegreen © OpenStreetMap contributors

Looking after it afterwards

Looking after the surface is easy:

  • A dripping tap stains enamel, so fix it early
  • Get any new chip repaired before it rusts
  • Clean with warm water and a mild detergent
  • Keep metal cans and razors off the surface

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.

Why repair rather than replace?

A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.

What you get with us

  • CHAS and Constructionline accredited
  • One visit for most repairs
  • Work done at your home or business
  • No extra charge for your area

Take a look at our full price list and resurfacing vs replacement cost guide.

What happens on the day

Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow a few hours from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Mention any parking restrictions or tricky access
  • Let the surface dry out before the visit

Ask for a price

The quickest way to a price is to send a couple of pictures through our quote form or call us. We will say straight away whether it can be repaired.

Get a fixed price

Advice

For landlords and businesses

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

We carry out planned and one-off repairs for housing associations and facilities teams in Essex and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.