Essex · England
Bath chip & crack repair in Roundbush, Essex
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Roundbush and across Essex. Send photos for a free, fixed quote.
- Repairs from £95
- Damage beneath the taps
- Impact holes in acrylic
Bath repair at your home in Roundbush
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, generally in a single visit. We are frequently asked to fix a cracked acrylic bath and a kit repair that didn’t last, in acrylic, whirlpool & spa baths and pressed steel enamel.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Roundbush (CM9)
- County
- Essex
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £95. You’ll know the full cost before booking. We take into account:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- What kind of damage it is
- The material and finish
Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
You can normally get a fixed quote without us visiting. To help us price it:
- Natural light rather than flash
- Details of any past repairs
- A photo taken from further back
- One sharp close-up of the damage
To get a price, send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Every repair guaranteed for a year
- No extra charge for your area
- Honest advice, even when it means no job
- Work done at your home or business
Read our pricing or resurfacing vs replacement cost guide.
How it works
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a few hours from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, generally by the next day, the bath is ready to use.
Before we arrive
- Ensure the room can be ventilated
- Ensure the area is dry
- Clear toiletries, mats and anything else from around the area
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Roundbush
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Do you need bath repair in Roundbush?
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Send us a picture if you notice any of these:
- A cracked acrylic bath
- Scratches you can feel with a fingernail
- A failed DIY repair that is discoloured or lifting
- A chip where the taps sit
Questions to ask before you book
- What happens if the damage is worse than the pictures show
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Your questions about bath repair in Roundbush
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Places near Roundbush
Other services in Roundbush
Where we work around Roundbush
Roundbush is about 3 miles south of Maldon, in Essex. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 644 places in Essex. Our jobs stretch from Roundbush to London (36 miles away).
Jobs in CM9 work the same way as everywhere else we cover. Whether you live on Fambridge Road, Burnham Road and Roundbush Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Cold Norton (1 mile south-west), Farther Howegreen (1 mile west), Howegreen (1 mile west), Purleigh (1 mile west) and Great Canney (2 miles south-west). Further out, we also cover Chelmsford (9 miles north-west), Basildon (12 miles south-west), Braintree (15 miles north), Maldon (3 miles north), Canvey Island (12 miles south) and Billericay (12 miles west).
What’s near Roundbush
Our customers here include homes close to Parish Church of All Saints, The White Horse Public House and Cold Norton Primary School, among other places. For rail, the closest station is North Fambridge station, about 2.4 miles south. The countryside around Roundbush includes Stow Maries Halt.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
