County Durham · England
Bath Repair in Hummerbeck
Bath repair in Hummerbeck without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- A chip where the taps sit
- Chips caused by builders
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Don’t scrub with anything abrasive
- Rinse the bath after use, especially in hard water areas
- Do not leave razors or cans standing in the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
A repaired bath needs no special treatment. Skip bleach and gritty creams and rinse after use.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
How we handle bath repair in Hummerbeck
Most of our bath repairs take a few hours, and you can generally bathe again the following day. You won’t need a plumber or tiler, because nothing is disconnected. Our repair technicians work on cast iron enamel, whirlpool & spa baths and roll-top & freestanding, and the jobs we see most are an old repair that has yellowed or come loose and damage beneath the taps.
You get a one-year guarantee, the same in Hummerbeck as everywhere else we work.
- Area
- Hummerbeck (DL14)
- Area hub
- County Durham
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Hummerbeck. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Rooms protected and left tidy
- Straight answers about what a repair can do
- Everything repaired in place
- Typically one visit, start to finish
See our pricing and bath cost comparison.
When to call us in Hummerbeck
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we are called about are:
- An old repair that has yellowed or come loose
- A cracked acrylic bath
- Rusty patches near the plughole
- Deep scratches in acrylic
Questions to ask before you book
- The length of the guarantee and what it covers
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
- How soon you can use it again
How it works
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. It normally takes two to three hours for most chips, and we will keep you posted as we go.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Open a window if you can
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
Ask for a price
For a price in Hummerbeck, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Places near Hummerbeck
Also in Hummerbeck
What we can’t put right
A repair isn’t always the answer, and we will tell you before we start. Repairs won’t solve:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before booking. We look at:
- How hard the colour is to match
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- How many areas need work
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Quotes from your photos
You can typically get a fixed price without us visiting. To help us price it:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- One sharp close-up of the damage
- A picture taken from further back
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
FAQs for Hummerbeck
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Can a cracked acrylic bath be fixed?
Normally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Is a holed acrylic bath repairable?
Often, if there is access underneath. We back the hole, fill it and refinish the surface.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Our work in Hummerbeck
Hummerbeck is about 2 miles south-west of Bishop Auckland, in County Durham. Customers in Hummerbeck get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Hummerbeck is one of 329 towns and villages in County Durham where we work. Our jobs stretch from Hummerbeck to Newcastle upon Tyne (25 miles away).
We work across the DL14 postcode area and the streets around it. If you’re just outside Hummerbeck, we cover West Auckland (1 mile north-west), St Helen Auckland (1 mile north), Evenwood Gate (2 miles south-west), Etherley Dene (2 miles north) and Evenwood (2 miles west). Further out, we also cover Durham (12 miles north-east), Newton Aycliffe (5 miles east), Spennymoor (7 miles north-east), Shildon (3 miles east), Crook (6 miles north) and Ferryhill (8 miles north-east).
Local landmarks in Hummerbeck
We visit homes around The Queens Head Public House, Oakley Cross Primary School and Nursery and Church of St Helen and the streets around them. The nearest railway station is Bishop Auckland station, about 2.7 miles north-east. A little further out are Bishop Auckland Hospital (2.5 miles north-east) and Auckland Castle (3.3 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
