County Durham · England
Bath Repair for West Auckland homes
Problem with your bath in West Auckland? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
Bath repair at your home in West Auckland
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We are often asked to fix a chipped rim or side and hairline or through cracks in acrylic, across pressed steel enamel, whirlpool & spa baths and cast iron enamel.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- West Auckland (DL14)
- Area hub
- County Durham
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
Before booking, it’s worth knowing the limits:
- A steel bath rusted through
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we will say what we think before booking.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What we are called out for in West Auckland
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
The things customers typically mention when they call are:
- Snagging damage from a refit
- A failed DIY repair that is discoloured or lifting
- A chip where the taps sit
- Rust by the waste and overflow
Before booking anyone
- How changes to the job are handled
- The length of the guarantee and what it covers
- Aftercare advice
- Whether the colour is mixed to match
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
The process
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a few hours. We clean up when we’re done and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the day after, the bath is ready to use.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Our work in West Auckland
West Auckland is about 2 miles south-west of Bishop Auckland, in County Durham. From the centre of West Auckland to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. West Auckland is one of 329 places in County Durham we cover. Our nearest city page is Newcastle upon Tyne, about 25 miles away.
Our visits in DL14 are booked in the same way as anywhere else. From Station Road, Front Street and Lomond Walk or a nearby road, we can come to you. If you are just outside West Auckland, we cover St Helen Auckland (1 mile north-east), Hummerbeck (1 mile south-east), Etherley Dene (1 mile north-east), High Etherley (1 mile north-west) and Etherley Grange (2 miles north). We also work in nearby towns such as Durham (12 miles north-east), Newton Aycliffe (6 miles east), Spennymoor (7 miles north-east), Shildon (3 miles east), Crook (6 miles north) and Ferryhill (8 miles north-east).
Local landmarks in West Auckland
Around West Auckland, we work in homes near Church of St Helen, Oakley Cross Primary School and Nursery and West Auckland Working Mens Club pub and the streets around them. For rail, the closest station is Bishop Auckland station, roughly 2.5 miles north-east. Further afield, we also cover the area around Witton Castle (3 miles north-west) and Bishop Auckland Hospital (2.4 miles north-east).
Also near West Auckland
What else we do in West Auckland
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Give the bath a quick rinse after use
- Put a towel in the bath if you are working above it
- Ensure an acrylic bath is firm underfoot
- Don’t leave a fresh chip for long
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
Questions from West Auckland
How do I get a price for bath repair in West Auckland?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you repair a hole in a bath?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Is a cracked acrylic bath repairable?
Typically, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Which areas do you work in?
All of County Durham, and the rest of the UK. There is no extra charge for travel.
How long before I can use the bath?
Most baths can be used the next day. We will tell you the exact curing time when we finish.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
What affects the price in West Auckland
Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:
- Any earlier repairs that need removing first
- How much damage there is
- Access to the area
- The material
Our prices are the same across the UK, with no extra for West Auckland. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
You can usually get a fixed quote without us visiting. To make it quick:
- A photo taken from further back
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
