West Berkshire · England

Bath chip & crack repair in Hungerford, West Berkshire

We travel to Hungerford for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Chips on the rim or sides
  • Damage beneath the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Hungerford homes

About our bath repair in Hungerford

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. We regularly repair roll-top & freestanding, cast iron enamel and pressed steel enamel, and common reasons people contact us are a cracked acrylic bath and rust by the waste and overflow.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Hungerford (RG17)
County
West Berkshire
Guarantee
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

Hungerford and the surrounding area

Hungerford is about 8 miles west of Newbury, in West Berkshire. Whether you are in the middle of Hungerford or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in all 155 towns and villages in West Berkshire, from the larger towns to small villages. We work right across the region, from Hungerford to London (62 miles away).

Our technicians cover all of RG17. Local streets include High Street, Lancaster Square and Station Road, and we cover them all. Hungerford is on the A4 and A338, so it’s easy for us to reach. Neighbouring places we cover include Eddington (1 mile north-east), Upper Eddington (1 mile north), Leverton (1 mile north), Chilton Foliat (2 miles north-west) and Froxfield (2 miles west). Further out, we also cover Newbury (8 miles east), Thatcham (11 miles east), Speenhamland (8 miles east), Lambourn (7 miles north), Shaw (9 miles east) and Kingsclere (13 miles south-east). Being one of West Berkshire’s larger places, Hungerford sees plenty of our work.

What’s near Hungerford

Typical jobs here are in homes near John O'Gaunt School, The Borough Arms and Hungerford Primary School and the streets around them. There is a railway station in Hungerford itself: Hungerford station. The countryside around Hungerford includes Kintbury Newt Ponds and Inkpen Hill.

Map of Hungerford © OpenStreetMap contributors

Do you need bath repair in Hungerford?

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.

Common reasons people in Hungerford contact us are:

  • Rust by the waste and overflow
  • A cracked acrylic bath
  • Scuffs and scratches in the surface
  • Snagging damage from a refit

Comparing quotes

  • Whether there are any call-out or travel charges
  • How to look after the finish
  • What prep work is covered
  • Whether the price is fixed and includes VAT

Choosing a repair company

Repairing versus replacing in Hungerford

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.

What you get with us

  • We leave the room as we found it
  • We’ll tell you if it’s not worth repairing
  • Colour mixed on the day to match
  • Most jobs done in one visit

Take a look at our pricing or bath cost comparison.

Hungerford: your questions answered

How much does bath repair cost in Hungerford?

Repairs from £95. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your RG17 postcode.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

What do you need from me?

Just pictures, your postcode and a contact number. On the day, access to the room.

Is there any odour?

It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What if the damage is worse than the photos show?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

What we cannot put right

Honesty matters more than a booking, so here’s what a repair will not do:

  • Acrylic cracks with no access behind them
  • Rust that has eaten right through a steel bath
  • A bath worn all over, where resurfacing makes more sense

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths

DIY repairs versus a professional job

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

How we price bath repair

Prices start from £95. There’s no charge for travel to Hungerford. The price depends on:

  • Doing more than one item at once
  • How easy the damage is to reach
  • Previous DIY repairs that have to come out
  • The colour and finish to match

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

How to get a fixed price

You can take the photos on your phone. Just make sure we can see:

  • One sharp close-up of the damage
  • Where you are, by postcode
  • What it’s made of, if you know
  • A coin beside the damage so we can judge size

Send us a photo of the damage and one of the entire item, with your RG17 postcode, and we’ll come back with a fixed quote.

The process

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a few hours. We clean up when we are done and let you know when you can use it again.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Let us know which floor the room is on
  • Mention any earlier repairs or resurfacing
  • Mention any parking restrictions or tricky access

Ask for a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

Get a free quote

Advice

How to care for the repair

Looking after the surface is easy, and it makes a real difference:

  • Protect the bath with a towel when doing jobs nearby
  • Check that an acrylic bath doesn’t move when you stand in it
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Don’t leave razors or cans standing in the bath

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.