Wiltshire · England

Bath Repair for Froxfield homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Froxfield. Free, fixed quotes from your pictures.

  • Repairs from £95
  • A chipped rim or side
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Froxfield

What a repair can’t fix

A few problems are outside what a surface repair can do:

  • Flexing caused by a failed cradle or loose feet
  • Water coming from the waste or taps rather than the bath
  • A steel bath rusted through

Send us photos and we will tell you honestly before you book.

What we work on

  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel

How we handle bath repair in Froxfield

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Typical jobs include a cracked acrylic bath and a kit repair that didn’t last, across acrylic, whirlpool & spa baths and cast iron enamel.

Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Area
Froxfield (SN8)
County
Wiltshire
Warranty
12 months on all our work
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

How it works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the following day.

Preparing for the visit

  • Open a window if you can
  • Tell us about parking, stairs or access
  • Tell us if there are stairs or a lift

Ask for a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Get a fixed price

Read more

Do you need bath repair in Froxfield?

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.

If you can see any of these, send us a photo:

  • Scuffs and scratches in the surface
  • Rusty patches near the plughole
  • Chips on the rim or sides
  • Damage beneath the taps

What to look for in a quote

  • If travel is included in the price
  • What prep work is covered
  • Who will actually do the work
  • What happens if the damage is worse than the photos show

Our hiring checklist

Landlord and trade work in Froxfield

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.

Why repair rather than replace?

Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in a single visit. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

What you get with us

  • Every repair guaranteed for a year
  • A fixed quote before you book
  • Nothing taken out or refitted
  • Same prices wherever you are

See our full price list or guide to resurfacing and replacement costs.

Questions from Froxfield

Will there be a smell?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

I tried a repair kit. Can you fix it?

Regularly. We strip it out, deal with any rust and repair it again.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

What do you need from me?

Use the quote form or ring 0345 017 0787.

Is a cracked acrylic bath repairable?

Usually, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.

Will the repair last?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

What about rust by the waste?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

DIY kit or professional repair?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

Repairs by material

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

Covering Froxfield

Froxfield is about 11 miles west of Newbury, in Wiltshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. We cover 425 places across Wiltshire. You can also see our page for London, about 64 miles away.

Every address in SN8 is within our area, from the main roads to the quietest streets. You’ll find streets such as Church Road, Bath Road and Manor Park. If you are just outside Froxfield, we cover Chilton Foliat (2 miles north-east), Hungerford (2 miles east), Leverton (2 miles north-east), Upper Eddington (3 miles east) and Eddington (3 miles east). We also work in nearby towns such as Marlborough (7 miles west), Pewsey (10 miles south-west), Aldbourne (5 miles north-west), Burbage (6 miles south-west), Ramsbury (3 miles north-west) and Netheravon (15 miles south-west).

What’s near Froxfield

In Froxfield, that means homes near Church of St Michael, The Pelican Public House and Church of All Saints. The closest station to Froxfield is Bedwyn station, roughly 2.4 miles south-west of the centre. Other landmarks nearby include Lewisham Castle (4.9 miles north-west) and Bedwyn Stone Museum (2.7 miles south-west).

Map of Froxfield © OpenStreetMap contributors

What affects the price in Froxfield

Repairs from £95. Quotes are free and the price is fixed. What we look at:

  • Access to the area
  • How many items we do on one visit
  • How many areas need work
  • The material

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

Quotes from your pictures

A couple of clear pictures is all it takes. Try to include:

  • The postcode, so we can plan the visit
  • A close-up of the damage, in focus
  • Details of any past repairs
  • Daylight if possible, and no flash reflection

Email us a photo of the damage and a wider shot of the whole item, and tell us you’re in Froxfield, and we will reply with a fixed price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.