Norfolk · England
Bath Repair in Hunstanton
We travel to Hunstanton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A cracked acrylic bath
- Damage done while the bathroom was being fitted
Questions from Hunstanton
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Which areas do you work in?
All of Norfolk, and the rest of the UK. Travel is included in the price.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
What does bath repair cost?
Prices start from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your PE36 postcode.
About our bath repair in Hunstanton
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There’s no need to book a plumber or tiler, because nothing is disconnected. Typical jobs include scuffs and scratches in the surface and rust spots around the plughole, on acrylic, whirlpool & spa baths and pressed steel enamel.
You get a one-year guarantee, the same in Hunstanton as everywhere else we work.
- Where
- Hunstanton (PE36, PE31)
- Region
- Norfolk
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Hunstanton
More services for Hunstanton
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Hunstanton and nearby
Hunstanton is about 13 miles north of King's Lynn, in Norfolk. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Hunstanton is one of 797 places in Norfolk we cover.
Postcode districts we cover here: PE36 and PE31. That includes homes on High Street, Lincoln Square South and Lincoln Square North and the roads around them. Being close to the A149 and B1161, Hunstanton is easy for our technicians to reach. Other places close to Hunstanton include Old Hunstanton (1 mile north-east), Ringstead (2 miles east), Heacham (2 miles south), Holme next the Sea (2 miles north-east) and Sedgeford (3 miles south-east). Within a short drive, we also cover King's Lynn (13 miles south), Fairstead (13 miles south), West Lynn (13 miles south), North Lynn (12 miles south), Wells-next-the-Sea (15 miles east) and Dersingham (6 miles south).
Near you in Hunstanton
In Hunstanton, that means homes near Church of St Edmund, Smithdon High School and Hunstanton Primary School, among other places. Not far away are Shepherd's Lake and Wild Ken Hill.
What we’re called out for in Hunstanton
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
If you can see any of these, send us a picture:
- Rusty patches near the plughole
- Cracks in an acrylic bath
- Chips caused by builders
- Holes from dropped items
Questions to ask before booking
- Whether a trained technician does the job
- Whether there are any call-out or travel charges
- Whether the colour is mixed to match
- When it can be used again
What we do, step by step
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
- Let us know about parking or access
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- Acrylic cracks with no access behind them
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Hunstanton clients choose us
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- Repair technicians who travel to you, UK-wide
See our pricing and guide to resurfacing and replacement costs.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- A dripping tap stains enamel, so fix it early
- Store metal items away from the bath
- Clean with warm water and a mild detergent
- Give the bath a quick rinse after use
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
How we price bath repair
Prices start from £95. Every quote is fixed and free. What we look at:
- The material
- The type of damage
- Whether old repairs or coatings need taking off
- Doing more than one item at once
We charge the same wherever you are, so there’s no premium for Hunstanton. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- The postcode, so we can plan the visit
- The material, if you know it
- Any earlier repairs or coatings
- Something in shot to show the size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
