Bradford · England
Bath chip & crack repair in Idle, Bradford
We travel to Idle for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- A chipped rim or side
Bath repair in Idle, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Common call-outs are for rust by the waste and overflow and cracks in an acrylic bath, on cast iron enamel, roll-top & freestanding and pressed steel enamel.
Every repair is covered by our one-year guarantee.
- Area
- Idle (BD10)
- Region
- Bradford
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Have new chips seen to early
- Use a soft cloth and washing-up liquid for everyday cleaning
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- Previous DIY repairs that have to come out
- The type of damage
- The size and number of damaged areas
- How easy the damage is to reach
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
How to get a fixed price
Most quotes are done from photos alone. To make it quick:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- Natural light rather than flash
- Any details about the material
If you’re in Idle and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Also in Idle
Idle and the surrounding area
Idle is about 2 miles east of Shipley, in Bradford. Across the BD10 area, a technician comes to you. We cover all 140 towns and villages in Bradford. Our nearest city page is Leeds, about 8 miles away.
We work across the BD10 postcode area. Local streets include Back Lane, Butt Lane and Park Road, and we cover them all. With the A657 close by, Idle is simple for us to get to. We also travel to Thackley (1 mile north-west), Greengates (1 mile south-east), Apperley Bridge (1 mile east), Eccleshill (1 mile south) and Charlestown (1 mile west). We also work in nearby towns such as Bradford (3 miles south-west), Keighley (8 miles west), Bingley (4 miles west), Great Horton (5 miles south-west), Upper Green (5 miles south-west) and Wibsey (5 miles south).
Near you in Idle
In Idle, that means homes near Church of the Holy Trinity, The White Bear Public House and Immanuel College and the streets around them. For rail, the closest station is Apperley Bridge station, about 0.9 miles east. Further afield, we also cover the area around World of Sooty (1.3 miles west) and Westfield Bradford (3.2 miles south). Open spaces near Idle include Idle Hill and Heaton Reservoir Nature Reserve.
Common problems we fix in Idle
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.
Most people contact us when they notice one of these:
- Holes from dropped items
- Chips along the edge of the bath
- Snagging damage from a refit
- A chip where the taps sit
Questions to ask before booking
- Whether they match the colour on site
- Whether there are any call-out or travel charges
- What preparation is included
- What happens if the damage is worse than the photos show
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. Allow a few hours, depending on the damage, and we will tell you if anything changes.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can generally use the bath the next day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
How to get a price
To get a price, send a couple of photos using our quote form or call us. We’ll say straight away whether it can be repaired.
Read more
Landlords, agents and businesses in Idle
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Idle use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Honest limits
It helps to know what we cannot do too:
- A steel bath rusted through
- Cracks in acrylic we can’t reach from underneath
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Idle
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Idle: your questions answered
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you cover the whole of Bradford?
All of Bradford, and the rest of the UK. Travel is included in the price.
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Can a cracked acrylic bath be fixed?
Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
