Bradford · England

Bath Repair for Greengates homes

Problem with your bath in Greengates? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Chips on the rim or sides
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Greengates

How we handle bath repair in Greengates

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair cast iron enamel, roll-top & freestanding and acrylic, and common reasons people contact us are hairline or through cracks in acrylic and an old repair that has yellowed or come loose.

Whatever the size of the job, you get the same one-year guarantee in Greengates and across Bradford.

Bath enamel chip by the waste, filled and colour matched (before and after)
Area
Greengates (BD10, LS28)
Region
Bradford
Warranty
One year on every repair
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

Questions from Greengates

Can you quote from pictures?

In nearly every case. If pictures do not show enough, we’ll ask for another angle.

Can you repair a crack in an acrylic bath?

Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Bradford.

What about rust by the waste?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

Is there any odour?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Can you repair a failed DIY repair?

Yes. We take out the old repair and do it properly. Tell us about it when you send photos.

Repair or replace: which is better?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Why Greengates customers choose us

  • Honest advice, even when it means no job
  • Fixed prices from your photos
  • Colour-matched on site
  • Typically one visit, start to finish

Read our pricing and resurfacing vs replacement cost guide.

What we do, step by step

Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes a few hours, depending on the damage. We leave the room clean and you’ll know when it can be used.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

Preparing for the visit

  • Make sure the room can be ventilated
  • Keep pets and children out of the room while we work
  • Let us know if it has been repaired before

Ask for a price

To get a price, send a couple of photos using our quote form or ring us. We will say right away if a repair is the right fix.

Send pictures for a quote

Advice

Prices and what affects them

Repairs from £95. Quotes are free and the price is fixed. What we take into account:

  • How easy the damage is to reach
  • What the surface is made of
  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Quotes from your photos

A couple of clear pictures is all it takes. It helps if you send:

  • Where you are, by postcode
  • A picture taken from further back
  • A coin or ruler next to the damage for scale
  • Daylight if possible, and no flash reflection

Most clients in Greengates get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Covering Greengates

Greengates is about 3 miles north-west of Pudsey, in Bradford. We visit homes and businesses in Greengates and the surrounding area, so there’s no workshop to go to. Greengates is one of 140 towns and villages in Bradford where we work. Our jobs stretch from Greengates to Leeds (7 miles away).

We work across BD10 and LS28. Jobs here include addresses on Green Lane, Albion Road and Redcar Road. With the A657 close by, Greengates is simple for us to get to. We also cover the places around Greengates: Apperley Bridge (1 mile north-east), Idle (1 mile north-west), Eccleshill (1 mile south-west), Thackley (1 mile north-west) and Bolton Outlanes (1 mile south-west). We also work in nearby towns such as Bradford (3 miles south-west), Keighley (9 miles west), Bingley (5 miles west), Baildon (3 miles north-west), Great Horton (5 miles south-west) and Upper Green (5 miles south-west).

Around Greengates

In Greengates, that means homes near St John the Evangelist, Immanuel College and Greengates Primary Academy, among other places. Also close by are Seven Stars Public House (within half a mile north-east) and Peel Park (2 miles south-west). The nearest railway station is Apperley Bridge station, roughly 0.8 miles north of the centre. Further afield, we also cover the area around Leeds Road Fever Hospital (2.7 miles south) and World of Sooty (2 miles west). Open spaces near Greengates include Yeadon Tarn and Rodley Nature Reserve.

Map of Greengates © OpenStreetMap contributors

Work for landlords and builders

For anyone letting property in or around Greengates, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.

Landlords, letting agents and housing providers in Greengates use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

What we are called out for in Greengates

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

The most common problems we are called about are:

  • Cracks in an acrylic bath
  • Scuffs and scratches in the surface
  • Chips along the edge of the bath
  • Rust by the waste and overflow

Comparing quotes

  • Aftercare advice
  • Whether cleaning and preparation are in the price
  • How long the guarantee is and what it covers
  • Whether they match the colour on site

Choosing a repair company

When we’d advise against a repair

We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Wear across the whole surface, which needs re-enamelling
  • A bath that moves underfoot, until its support is fixed

Send us pictures and we’ll tell you honestly before you book.

Surfaces we repair

  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Keep metal cans and razors off the surface
  • If an acrylic bath flexes, have its feet adjusted
  • Have new chips seen to early
  • Get a dripping tap fixed promptly

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.