Lancashire · England

Bath Repair in Inskip Moss Side

We travel to Inskip Moss Side for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Cracks in an acrylic bath
  • A failed DIY repair that is discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Inskip Moss Side

Can I fix it myself?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

About our bath repair in Inskip Moss Side

You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Whether it’s a chipped rim or side and scuffs and scratches in the surface, we can typically put it right, on whirlpool & spa baths, cast iron enamel and acrylic alike.

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Where
Inskip Moss Side (PR4, PR3)
Area hub
Lancashire
Warranty
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

What a repair cannot fix

A few problems are outside what a surface repair can do:

  • A bath that moves underfoot, until its support is fixed
  • Acrylic cracks with no access behind them
  • Wear across the entire surface, which needs re-enamelling

Not sure? Send pictures and we’ll give you a straight answer.

What we work on

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel

Looking after it afterwards

So the finish stays in good condition for years:

  • Ensure an acrylic bath is firm underfoot
  • Stick to mild cleaners and a soft cloth
  • Keep metal cans and razors off the surface
  • Don’t scrub with anything abrasive

A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and rinse after use.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.

Landlord and trade work in Inskip Moss Side

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

Repair or replace in Inskip Moss Side?

Many people think a damaged bath means a new one. Normally it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Our prices are the same across the UK, so there’s no premium for Inskip Moss Side. What changes the price is the job itself: the material, the amount of damage and how many items.

Why choose Surface Doctor in Inskip Moss Side

  • Technicians who travel to you, UK-wide
  • Honest advice, even when it means no job
  • A fixed quote before you book
  • We leave the room as we found it

Read our prices page or resurfacing vs replacement cost guide.

Common problems we fix in Inskip Moss Side

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

Most people contact us after spotting one of these:

  • Holes from dropped items
  • Rust spots around the plughole
  • Chips on the rim or sides
  • Damage done while the bathroom was being fitted

Comparing quotes

  • Whether the price is fixed and includes VAT
  • Whether a trained technician does the job
  • What prep work is covered
  • How the room is protected while they work

Our hiring checklist

The process

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a few hours, depending on the damage. At the end we talk you through the curing time and the aftercare.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the day after.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Have a window or extractor fan available
  • Clear toiletries, mats and anything else from around the area

Ask for a price

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Send photos for a quote

Advice

What your bath is made of matters

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Inskip Moss Side and nearby

Inskip Moss Side is about 6 miles east of Poulton-le-Fylde, in Lancashire. Whether you’re in the middle of Inskip Moss Side or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 482 places in Lancashire. Our jobs stretch from Inskip Moss Side to Liverpool (about 31 miles away).

Postcode districts we cover here: PR4 and PR3. Streets in the area include Hornby Lane, Moss Lane and Brock Road. Close by, we cover Inskip (1 mile south-east), St Michael's on Wyre (2 miles north-east), Great Eccleston (2 miles west), Roseacre (2 miles south-west) and Ratten Row (2 miles north-west). We also work in nearby towns such as Preston (8 miles south-east), Lancaster (14 miles north), Lytham St Anne's (10 miles south-west), Bamber Bridge (11 miles south-east), Morecambe (15 miles north) and Leyland (12 miles south-east).

What’s near Inskip Moss Side

Typical jobs here are in homes near Church of St Peter and Inskip St Peter's Church of England Voluntary Aided School. Inskip Moss Side’s nearest station is Salwick station, roughly 4.5 miles south of the centre. Nearby you will also find Greenhalgh Castle (4.8 miles north-east). Open spaces near Inskip Moss Side include Winmarleigh and Cockerham Moss.

Map of Inskip Moss Side © OpenStreetMap contributors

FAQs for Inskip Moss Side

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Will the repair last?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

When can I have a bath again?

Most baths can be used the following day. We will tell you the exact curing time when we finish.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

How invisible is a bath repair?

The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Lancashire.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.