Lancashire · England

Bath chip & crack repair in Preston, Lancashire

Bath repair in Preston without the cost of replacing. Send us pictures for a fixed price, then we come to you.

  • Repairs from £95
  • Deep scratches in acrylic
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Preston homes

How we handle bath repair in Preston

You don’t need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day. We regularly repair acrylic, roll-top & freestanding and whirlpool & spa baths, and common reasons people get in touch are holes from dropped items and rust by the waste and overflow.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Preston (PR1, PR2, PR3, PR4)
Area hub
Lancashire
Warranty
One year on every repair
Price
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

What affects the price in Preston

Repairs from £95. You will not pay by the hour. The price depends on:

  • Access to the area
  • What kind of damage it is
  • The material
  • How hard the colour is to match

A repair is priced on what needs doing, not where you live. You’ll see the full price before booking.

Getting a price from photos

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • One picture of the whole bath
  • Any earlier repairs or coatings
  • The postcode, so we can plan the visit
  • Daylight if possible, and no flash reflection

Email us photos of the damage and one of the whole item, with your PR1 postcode, and we’ll reply with a fixed price.

Landlord and trade work in Preston

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Where we work around Preston

Preston is about 27 miles north of Liverpool, in Lancashire. Across the PR1 area, a technician comes to you. We cover 482 places in Lancashire. Our nearest city page is Liverpool, about 27 miles away.

Here we cover the PR1, PR2, PR3 and PR4 postcode area. Whether you live on St Ignatius' Square, St Paul's Square and Market Street West or a nearby road, a technician can come to you. With the A6 and A59 close by, Preston is simple for us to get to. If you are just outside Preston, we cover Deepdale (1 mile east), Fishwick (1 mile east), Ribbleton (1 mile east), Brookfield (2 miles north-east) and Walton-le-Dale (2 miles south-east). Further out, we also cover Chorley (8 miles south), Lytham St Anne's (13 miles west), Bamber Bridge (3 miles south-east), Accrington (14 miles east), Leyland (5 miles south) and Clitheroe (14 miles north-east). As one of the bigger places in Lancashire, Preston is somewhere we visit often.

Near you in Preston

We visit homes around Preston Catholic College, Minster Church of Saint John the Evangelist and Moor Park High School and the streets around them. Also close by are The Moorbrook pub (under half a mile west), City Mosque Preston (under half a mile south-west), Moor Park (0.5 miles north) and St Ignatius' Catholic Primary School (less than half a mile south). Preston’s nearest station is Preston station, about 0.9 miles south-west of the centre. Other landmarks nearby include Preston Royal Infirmary (within half a mile south-east) and Duke of Lancaster's Own Yeomanry Museum (0.5 miles south-east). Not far away are Brockholes.

  • Parks and local facilities nearby include Tulketh (0.7 miles west)
Map of Preston © OpenStreetMap contributors

When a repair isn’t the answer

A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:

  • Acrylic cracks with no access behind them
  • A bath worn all over, where resurfacing makes more sense
  • Flexing caused by a failed cradle or loose feet

Send us pictures and we’ll tell you honestly before you book.

Materials we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding

Repair or replace in Preston?

A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Preston

  • We come to you, anywhere in the UK
  • Normally one visit, start to finish
  • Nothing taken out or refitted
  • No extra charge for your area

Read our full price list and resurfacing vs replacement cost guide.

Keeping it looking good

Good habits make a big difference to how long a repair lasts:

  • Clean with warm water and a mild detergent
  • Have new chips seen to early
  • Protect the bath with a towel when doing jobs nearby
  • Fix dripping taps early to stop staining and limescale

Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.

Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.

What we’re called out for in Preston

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.

Common reasons people in Preston contact us are:

  • A chip where the taps sit
  • Rusty patches near the plughole
  • Holes from dropped items
  • Cracks in an acrylic bath

Before you book anyone

  • If travel is included in the price
  • The length of the guarantee and what it covers
  • What protection goes down before work starts
  • What happens if they find more damage

Choosing a repair company

Repairs by material

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

How the visit works

We work cleanly and quietly. We protect the area first, then the work takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Ensure the area is dry
  • Mention any parking restrictions or tricky access

Get a quote

Most customers in Preston get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a free quote

Read more

Preston questions

Is a holed acrylic bath repairable?

Usually. Photos of the hole and the underside help us check.

Do you work in Preston?

Yes. We work across the UK and come to Preston. Send photos and we will quote, or call 0345 017 0787.

What about rust by the waste?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

How do I get a price for bath repair in Preston?

Repairs from £95. We give a fixed price from your photos. Send a close-up and a photo of the whole item with your PR1 postcode.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is the work guaranteed?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Does someone need to be in?

We need someone to let us in. You don’t need to watch us work.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.