Highland · Scotland

Bath Repair in Invermoriston

Problem with your bath in Invermoriston? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Snagging damage from a refit
  • A chipped rim or side
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Invermoriston

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Bath repair in Invermoriston without replacing anything

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. We’re often asked to fix a chip where the taps sit and snagging damage from a refit, across cast iron enamel, whirlpool & spa baths and acrylic.

Every job is backed for twelve months in Invermoriston and everywhere else. If something goes wrong with the work, we come back.

Before and after: a damaged acrylic bath corner repaired in place
Area
Invermoriston (IV63)
County
Highland
Cover
A year, on every repair
Quotes
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

Looking after it afterwards

So the finish stays in good condition for years:

  • Do not leave razors or cans standing in the bath
  • Avoid scourers, wire wool and gritty cream cleaners
  • Rinse it down after each bath
  • Do not leave a fresh chip for long

Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

Landlords, agents and businesses in Invermoriston

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

How the visit works

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow a few hours from start to finish. Before we go, we’ll explain when it can be used and how to look after it.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Ensure the room can be ventilated
  • Let us know if it has been repaired before

Getting a price

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.

Get a fixed price

Related advice

Repair or replace: which is better?

Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why us?

  • No extra charge for your area
  • Repair technicians who travel to you, UK-wide
  • Rooms protected and left tidy
  • Straight answers about what a repair can do

Read our full price list or resurfacing vs replacement cost guide.

Common problems we fix in Invermoriston

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.

These are the problems we’re asked about most:

  • Rust by the waste and overflow
  • Holes from dropped items
  • Scratches you can feel with a fingernail
  • Cracks in an acrylic bath

What your quote should include

  • When it can be used again
  • Is the price fixed, and does it include VAT?
  • If travel is included in the price
  • What prep work is covered

10 questions to ask before you book

Invermoriston and the surrounding area

Invermoriston is about 23 miles south-west of Inverness, in Highland. We visit homes and businesses in Invermoriston, so you don’t need to take anything anywhere. Invermoriston is one of 253 towns and villages in Highland we cover.

We work across IV63 and the streets around it. You’ll find streets such as Riverside Park and Glendale Park. Nearby, we also work in Stratherrick (4 miles south-east), Fort Augustus (5 miles south-west), Gorthleck (7 miles east), Glen Moriston (7 miles south-west) and Newtown (9 miles south-west). For island and remote addresses, ring us first and we’ll plan the trip.

Near you in Invermoriston

In Invermoriston, that means homes near Church of Scotland. For a walk, there’s Loch a' Mheig and Càrn an t-Seana-bhlàir.

Map of Invermoriston © OpenStreetMap contributors

How we price bath repair

Prices start from £95. Every quote is fixed and free. What we look at:

  • Previous DIY repairs that have to come out
  • The size and number of damaged areas
  • Access to the area
  • The colour and finish to match

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

How to get a fixed price

When you take your pictures, these tips help us give you a firm price:

  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • Something in shot to show the size
  • A wider photo showing the entire bath

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

Common questions in Invermoriston

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Will there be a smell?

Expect a mild smell while we are working, which fades afterwards.

What happens next?

We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.

Can you price it without visiting?

Usually, yes. A close-up and a wider photo are enough to give a fixed price.

Are there extra charges for Invermoriston?

There is no separate call-out charge. The fixed quote covers the visit and the work.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

How long before I can use the bath?

Typically the following day. We confirm the time before we leave.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.