Lincolnshire · England
Bath Repair for Irnham homes
Fixed-price bath repair in Irnham and the surrounding area, usually in one visit.
- Repairs from £95
- Chips along the edge of the bath
- A chip where the taps sit
Bath repair in Irnham without replacing anything
Most of our bath repairs take a few hours, and you can usually bathe again the next day. There is no need to book a plumber or tiler, because nothing is disconnected. If you are dealing with a chip where the taps sit and chips caused by builders, we can generally put it right, whatever the material.
Whatever the size of the job, you get the same one-year guarantee in Irnham and across Lincolnshire.
- Where
- Irnham (NG33)
- County
- Lincolnshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
It helps to know what we can’t do:
- Leaking fittings, which need a plumber
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
What affects the price in Irnham
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- Whether we combine several jobs
- How many areas need work
- How easy the damage is to reach
- How hard the colour is to match
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- The material, if you know it
- A picture taken from further back
- Daylight if possible, and no flash reflection
- Details of any past repairs
Send us a photo of the damage and a wider shot of the whole item, with your NG33 postcode, and we will reply with a fixed quote.
Irnham and the surrounding area
Irnham is about 6 miles north-west of Bourne, in Lincolnshire. From the centre of Irnham to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 732 towns and villages across Lincolnshire. Our jobs stretch from Irnham to Birmingham (64 miles away).
Postcode districts we cover here: NG33. We regularly work on streets such as Hawthorpe Road and Swinstead Road. We also travel to Lenton (2 miles north), Elsthorpe (3 miles south-east), Kirkby Underwood (3 miles east), Stainfield (3 miles east) and Pickworth (4 miles north). Larger places within reach include Grantham (9 miles north-west), Spalding (14 miles east), Stamford (12 miles south), Sleaford (12 miles north), Bourne (6 miles south-east) and Austerby (6 miles south-east).
Around Irnham
Typical jobs here are in homes near Church of St. Andrew, Charles Read Academy and Griffin Inn and the streets around them. Nearby you’ll also find Aslackby Castle (4.4 miles north-east).
Landlord and trade work in Irnham
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
The process
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Let the surface dry out before the visit
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
More services for Irnham
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Our bath repair starts from £95. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why Irnham customers choose us
- One price list for the entire UK
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- Fixed prices from your pictures
See our full price list and guide to resurfacing and replacement costs.
Signs you need bath repair in Irnham
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Clients normally contact us about:
- Scratches you can feel with a fingernail
- A hole punched through by something heavy
- Cracks in an acrylic bath
- A chip where the taps sit
Comparing quotes
- Whether they match the colour on site
- If travel is included in the price
- Who will actually do the work
- When it can be used again
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Questions from Irnham
Can you repair a hole in a bath?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Do you cover Irnham?
We do. We send a technician to Irnham for every job, and the price is the same as everywhere else.
Is a cracked acrylic bath repairable?
Normally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
Can rust on a bath be repaired?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
About our accreditations · Every repair comes with a one-year guarantee.
