Lancashire · England
Bath Repair in Keasden
Fixed-price bath repair in Keasden and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Damage beneath the taps
- A kit repair that didn’t last
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, photos and access details.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Bath repair at your home in Keasden
A typical bath repair is a few hours’ work, and you can usually bathe again the day after. There’s no need to book a plumber or tiler, because nothing is disconnected. We work on roll-top & freestanding, cast iron enamel and acrylic, and people most frequently call us about deep scratches in acrylic and a cracked acrylic bath.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Keasden (LA2)
- Area hub
- Lancashire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
It helps to know what we cannot do too:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we cannot reach from underneath
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Keasden
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Towns and villages near Keasden
What else we do in Keasden
Repairing versus replacing in Keasden
People often assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
Why book with us
- Dust sheets down, tidy finish
- Everything repaired in place
- No extra charge for your area
- Honest advice, even when it means no job
Take a look at our full price list or resurfacing vs replacement cost guide.
What we are called out for in Keasden
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Look out for these signs:
- Holes from dropped items
- Scratches you can feel with a fingernail
- Snagging damage from a refit
- Hairline or through cracks in acrylic
Before booking anyone
- What preparation is included
- If travel is included in the price
- What happens if the damage is worse than the pictures show
- Aftercare advice
Prices and what affects them
Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:
- The material and finish
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- How easy the damage is to reach
Our prices are the same across the UK, so there’s no premium for Keasden. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
Two or three clear photos are typically enough. It helps if you send:
- The postcode, so we can plan the visit
- Any details about the material
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
How it works
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Let us know which floor the room is on
- Open a window if you can
- Point us to the nearest place to park
How to get a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
Keasden and the surrounding area
Keasden is about 15 miles east of Lancaster, in Lancashire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Keasden is one of 482 towns and villages in Lancashire where we work. We work right across the region, from Keasden to Leeds (41 miles away).
Our repair technicians cover all of the LA2 postcode area. If you’re just outside Keasden, we cover Mewith Head (1 mile west), Clapham (2 miles north-east), Newby (2 miles north), Eldroth (3 miles east) and Cold Cotes (3 miles north). Further out, we also cover Lancaster (15 miles west), Carnforth (14 miles west), Bolton-le-Sands (15 miles west), Coates (15 miles south-east), Caton (12 miles west) and Cragbank (15 miles west).
Around Keasden
Around Keasden, we work in homes near Flying Horse Shoe Hotel and St Matthew's Church and the streets around them. Keasden’s nearest station is Clapham (North Yorkshire) station, roughly 1 mile north-east of the centre. A little further out are Castleberg Hospital (5.6 miles east). Not far away are Great Harlow.
Keeping it looking good
So the finish stays in good condition:
- Cover the bath during DIY or decorating
- Rinse it down after each bath
- Keep metal cans and razors off the surface
- Keep abrasive pads and gritty cleaners away from the bath
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Common questions in Keasden
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair a crack in an acrylic bath?
Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Do you come to Keasden?
Yes, we do. We send a technician to Keasden for every job, with no extra charge for travel.
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we will plan for it.
Will the repair show?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
About our accreditations · Every repair comes with a one-year guarantee.
