Worcestershire · England

Bath Repair in Kent's Green

Damaged bath in Kent's Green? We repair it in place, match it on site and guarantee the work for a year.

  • Repairs from £95
  • A failed DIY repair that is discoloured or lifting
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Kent's Green

Honest limits

Before booking, it’s worth knowing the limits:

  • Flexing caused by a failed cradle or loose feet
  • Wear across the whole surface, which needs re-enamelling
  • Cracks in parts of an acrylic bath we cannot get to from below

Not sure? Send photos and we’ll give you a straight answer before you book.

What we work on

  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel

Bath repair in Kent's Green, done in place

Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Typical jobs include hairline or through cracks in acrylic and chips on the rim or sides, on roll-top & freestanding, whirlpool & spa baths and acrylic.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Kent's Green (WR2)
Region
Worcestershire
Warranty
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Kent's Green and nearby

Kent's Green is about 3 miles north-east of Great Malvern, in Worcestershire. Anywhere in WR2, we come to you. Our technicians cover all 376 towns and villages across Worcestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 27 miles away.

Jobs in WR2 work the same way as everywhere else we cover. Neighbouring places we cover include Callow End (1 mile south-east), Deblin's Green (1 mile south-west), Collett's Green (1 mile north-west), Bowling Green (1 mile north-west) and Bastonford (1 mile north-west). Larger places within reach include Worcester (4 miles north-east), Bromsgrove (15 miles north-east), Great Malvern (3 miles south-west), Droitwich Spa (9 miles north-east), Evesham (14 miles east) and Stourport-on-Severn (13 miles north).

Local landmarks in Kent's Green

In Kent's Green, that means homes near Stanbrook Abbey Stanbrook Abbey Church and Callow End CofE Primary School, among other places. The nearest railway station is Malvern Link station, about 3.1 miles south-west. Further afield, we also cover the area around Worcester Castle (3 miles north-east) and CrownGate Shopping Centre (3.4 miles north-east). Not far away are End Hill.

Map of Kent's Green © OpenStreetMap contributors

Common questions in Kent's Green

What happens once I’ve sent photos?

We come back with a fixed price, plus dates. There’s no obligation to book.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

I tried a repair kit. Can you fix it?

Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.

Is there any odour?

There can be some smell while we work. It fades as everything cures.

Is there a call-out fee?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Landlord and trade work in Kent's Green

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

What your bath is made of matters

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.

How to look after the repair

Most damage we see is avoidable. These habits help:

  • Do not leave razors or cans standing in the bath
  • A dripping tap stains enamel, so fix it early
  • If an acrylic bath flexes, have its feet adjusted
  • Protect the bath with a towel when doing jobs nearby

There is nothing special to do after a repair. Skip bleach and gritty creams.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

Why repair rather than replace?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.

Why Kent's Green clients choose us

  • No need to remove anything
  • A year’s guarantee on all work
  • Work done at your home or business
  • Colour mixed on the day to match

Take a look at our prices page or bath cost comparison.

Do you need bath repair in Kent's Green?

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.

Look out for any of the following:

  • Impact holes in acrylic
  • Snagging damage from a refit
  • Chips on the rim or sides
  • A chip where the taps sit

Questions to ask before you book

  • When it can be used again
  • Whether the price is fixed and includes VAT
  • How changes to the job are handled
  • Whether they match the colour on site

Choosing a repair company

The process

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.

  1. First, we check the damage against your pictures and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Clear the area around the damage
  • Keep a parking space free if you can
  • Mention if the room is upstairs or in a flat

Ask for a price

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.