Cheshire East · England

Bath Repair for Kerridge-end homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Kerridge-end, with a one-year guarantee on every repair.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Kerridge-end

About our bath repair in Kerridge-end

Most of our bath repairs take a few hours, and you can generally bathe again the next day. There is no need to book a plumber or tiler, because the bath doesn’t move. Our technicians work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and common reasons people contact us are damage beneath the taps and rusty patches near the plughole.

All our work is covered by a one-year guarantee, wherever you are in Cheshire East.

Before and after: a chipped, rust-stained bath around the plughole
Where
Kerridge-end (SK10)
Region
Cheshire East
Cover
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

The process

We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, and we leave the room as we found it.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Have somewhere for us to park nearby if possible
  • Have a window or extractor fan available
  • Tell us if there are stairs or a lift

Ask for a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a free quote

Related advice

Repairing versus replacing in Kerridge-end

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

Why Kerridge-end clients choose us

  • Honest advice, even when it means no job
  • No need to remove anything
  • We come to you, anywhere in the UK
  • Free fixed quotes from pictures

Read our prices page or guide to resurfacing and replacement costs.

How we price bath repair

Prices start from £95. We give every job a fixed price from pictures. This is what makes a difference:

  • How hard the colour is to match
  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear
  • The material

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

How to get a fixed quote

You can take the pictures on your phone, there’s no need for anything special. Make sure they show:

  • Any details about the material
  • Daylight if possible, and no flash reflection
  • The postcode, so we can plan the visit
  • A wider photo showing the entire bath

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you’re under no obligation.

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

What your bath is made of matters

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.

How to care for the repair

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Keep metal cans and razors off the surface
  • Stick to mild cleaners and a soft cloth
  • Have new chips seen to early

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

Kerridge-end questions

Do you cover Kerridge-end?

Yes. We work across the UK and come to Kerridge-end. Send us photos for a fixed quote, or call 0345 017 0787.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

What about rust by the waste?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Is there a guarantee?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

I tried a repair kit. Can you fix it?

Yes. We remove the old filler and start again. Tell us about it when you send photos.

Can you repair several things at once?

Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

How long does the repair take to cure?

Generally within a day, depending on the repair.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

When to call us in Kerridge-end

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.

You may need us if you’ve spotted:

  • Damage done while the bathroom was being fitted
  • Damage beneath the taps
  • A chipped rim or side
  • Scuffs and scratches in the surface

Comparing quotes

  • Whether the colour is mixed to match
  • What preparation is included
  • What aftercare is recommended
  • Whether the price is fixed and includes VAT

Choosing a repair company

Kerridge-end and the surrounding area

Kerridge-end is about 2 miles north-east of Macclesfield, in Cheshire East. Customers in Kerridge-end get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Kerridge-end is one of 254 towns and villages in Cheshire East where we work. We work right across the region, from Kerridge-end to Manchester (15 miles away).

Our visits in SK10 work the same way as everywhere else we cover. From Lidgetts Lane and Rainow Road or a nearby road, we can come to you. If you’re just outside Kerridge-end, we cover Brookhouse (1 mile north-east), Calrofold (1 mile south), Rainow (1 mile north-east), Kerridge (1 mile north-west) and Walker Barn (1 mile south-east). Larger places within reach include Congleton (9 miles south-west), Wilmslow (7 miles north-west), Knutsford (12 miles west), Sandbach (15 miles south-west), Poynton (5 miles north) and Holmes Chapel (12 miles south-west).

Around Kerridge-end

Around Kerridge-end, we work in homes near The Robin Hood Inn, Victoria Park and Tytherington School, among other places. You’ll also find Rainow Primary School (0.5 miles north-east) and Holy Trinity Church (0.6 miles north-east). Kerridge-end’s nearest station is Macclesfield station, roughly 1.8 miles south-west of the centre. Well-known places in the area include Duke's Court (2.1 miles south-west) and Macclesfield Castle (2 miles south-west). The countryside around Kerridge-end includes Trentabank Reservoir Nature Reserve and Kerridge Hill.

  • Parks and local facilities nearby include Macclesfield (2 miles south-west)
Map of Kerridge-end © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.