Greater London · England
Bath chip & crack repair in Kevington, Greater London
Chip and crack repairs to enamel, acrylic and cast iron baths in Kevington, carried out at your home and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Holes from dropped items

Bath repair in Kevington without replacing anything
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. Our technicians work on roll-top & freestanding, cast iron enamel and pressed steel enamel, and people most frequently call us about chips on the rim or sides and deep scratches in acrylic.
We stand behind the work with a one-year guarantee.

- Location
- Kevington (BR5)
- County
- Greater London
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Kevington
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.
What you get with us
- No extra charge for your area
- Free fixed quotes from pictures
- Repair technicians who travel to you, UK-wide
- No need to remove anything
See our full price list and resurfacing vs replacement cost guide.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How it works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a few hours. At the end we talk you through how soon it can be used and how to look after it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the day after.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Kevington and the surrounding area
Kevington is about 1 mile east of Orpington, in Greater London. Jobs in Kevington are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Kevington is one of 764 places in Greater London we cover. Our nearest city page is London, about 13 miles away.
All of BR5 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Crockenhill Road and Sheepcote Lane. We also cover the places around Kevington: Derry Downs (1 mile west), Crockenhill (1 mile east), St Mary Cray (1 mile west), Orpington (1 mile west) and Poverest (2 miles west). We also work in nearby towns such as London (13 miles north-west), City of Westminster (15 miles north-west), Marylebone (15 miles north-west), St Pancras (15 miles north-west), Shoreditch (13 miles north-west) and Walthamstow (15 miles north-west).
Near you in Kevington
Around Kevington, we work in homes near The Priory School, Unity Church and Harris Academy Orpington. Kevington’s nearest station is St Mary Cray station, about 1.4 miles north-west of the centre. Well-known places in the area include Lullingstone Castle (3.2 miles south-east) and London Borough of Bromley Museum (1.5 miles west). For a walk, there’s Summer Hill and The Warren.
Places near Kevington
Also in Kevington
When to call us in Kevington
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Send us a photo if you notice any of these:
- A failed DIY repair that is discoloured or lifting
- Chips along the edge of the bath
- Deep scratches in acrylic
- Chips under the taps
Comparing quotes
- Who turns up on the day
- Whether the colour is mixed to match
- How to care for the finish
- What protection goes down before work starts
How we price bath repair
Prices start from £95. Prices are worked out job by job. What matters most is:
- Where the damage is and how we get to it
- The material
- Doing more than one item at once
- The colour and finish to match
We charge the same wherever you are, so there is no premium for Kevington. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- Any earlier repairs or coatings
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Store metal items away from the bath
- Check that an acrylic bath does not move when you stand in it
- Clean with warm water and a mild detergent
- Rinse the bath after use, especially in hard water areas
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Honest limits
A few problems are outside what a surface repair can do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we cannot get to from below
- A steel bath rusted through
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Kevington questions
How do I get a price for bath repair in Kevington?
Repairs from £95. Because every job differs, we price from photos. You will get a fixed figure before you book.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
What about rust by the waste?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
About our accreditations · Every repair comes with a one-year guarantee.

