Greater London · England
Bath Re-enamelling for Kevington homes
Fixed-price bath re-enamelling in Kevington and the surrounding area, usually in one visit.
- Resurfacing from £350
- Stains that won’t shift
- Several chips and rust patches
Bath re-enamelling at your home in Kevington
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. We work on Victorian roll-tops, acrylic baths and cast iron baths, and people most often call us about a coating lifting around the plughole and a bath that stays dull however much you clean it.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Area
- Kevington (BR5)
- Region
- Greater London
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Kevington
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Clients normally contact us about:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- A roll-top that is seen better days
- Wear marks under the taps
Comparing quotes
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- Whether cleaning and preparation are in the price
- When it can be used again
Repairing versus replacing in Kevington
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, with the bath back in use the next day. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there is no premium for Kevington. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- We leave the room as we found it
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
- No need to remove anything
Take a look at our full price list and resurfacing vs replacement cost guide.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes the best part of a day. If anything looks different from your photos, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Getting ready for the visit
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
Ask for a price
Most clients in Kevington get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Kevington questions
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.
Do you cover the entire of Greater London?
We cover the whole UK, including Kevington and the rest of Greater London. Send your postcode with your photos and we will offer you dates.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Kevington. The price comes down to:
- The colour and finish to match
- The type of damage
- Where the damage is and how we get to it
- Doing more than one item at once
Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- A wider photo showing the whole bath
- Natural light rather than flash
- Something in shot to show the size
- A clear, close picture of the problem area
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Kevington as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Don’t leave bottles, razors or sponges standing on the surface
- Don’t leave a chip unrepaired
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Kevington and the surrounding area
Kevington is about 1 mile east of Orpington, in Greater London. Our technicians come to customers in Kevington and the surrounding area, so there is no workshop to go to. Our technicians cover 764 places in Greater London. You can also see our page for London, about 13 miles away.
Jobs in BR5 work the same way as everywhere else we cover. You will find streets such as Crockenhill Road and Sheepcote Lane, and we cover them all. Close by, we cover Derry Downs (1 mile west), Crockenhill (1 mile east), St Mary Cray (1 mile west), Orpington (1 mile west) and Poverest (2 miles west). We also work in nearby towns such as London (13 miles north-west), City of Westminster (15 miles north-west), Marylebone (15 miles north-west), St Pancras (15 miles north-west), Shoreditch (13 miles north-west) and Walthamstow (15 miles north-west).
Around Kevington
Locally, our jobs take us to homes close to The Priory School, Unity Church and Harris Academy Orpington and the streets around them. Kevington’s nearest station is St Mary Cray station, roughly 1.4 miles north-west of the centre. Further afield, we also cover the area around Lullingstone Castle (3.2 miles south-east) and London Borough of Bromley Museum (1.5 miles west). Green spaces nearby include Summer Hill and The Warren.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Also near Kevington
Other services in Kevington
About our accreditations · Every repair comes with a one-year guarantee.
