Cambridgeshire · England
Bath chip & crack repair in Keyston, Cambridgeshire
Our repair technicians come to Keyston for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips along the edge of the bath
- Rust by the waste and overflow
What we cannot put right
We’ll always be straight with you, so here’s what a repair cannot fix:
- Acrylic cracks with no access behind them
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Keyston
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Bath repair in Keyston, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on pressed steel enamel, roll-top & freestanding and acrylic, and people most frequently call us about cracks in an acrylic bath and chips caused by builders.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Keyston (PE28)
- County
- Cambridgeshire
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Keyston
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Keyston
- Colour-matched on site
- We come to you, anywhere in the UK
- Fixed prices from your photos
- One-year guarantee on every repair
Read our pricing or resurfacing vs replacement cost guide.
What else we do in Keyston
Prices and what affects them
Prices start from £95. We price every job individually, from your photos. The main factors are:
- What the surface is made of
- Doing more than one item at once
- Access to the area
- The colour and finish to match
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
You can take the pictures on your phone, there’s no need for anything special. Ensure they show:
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Upload a picture of the damage and one of the whole item, with your PE28 postcode, and we will reply with a fixed quote.
Signs you need bath repair in Keyston
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.
These are the problems we are asked about most:
- Chips along the edge of the bath
- Damage beneath the taps
- Scratches you can feel with a fingernail
- Damage done while the bathroom was being fitted
What to look for in a quote
- How long the guarantee is and what it covers
- What prep work is covered
- When it can be used again
- How your room will be protected
Your questions about bath repair in Keyston
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you repair a hole in a bath?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Is a cracked acrylic bath repairable?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Are there extra charges for Keyston?
No. Our quotes include travel, with the same prices everywhere we work.
When can I have a bath again?
Normally by the following day, depending on the repair.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How much does bath repair cost in Keyston?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
About Keyston
Keyston is about 8 miles north-east of Rushden, in Cambridgeshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Keyston is one of 371 towns and villages in Cambridgeshire where we work. We work right across the region, from Keyston to Birmingham (60 miles away).
Our visits in PE28 work the same way as everywhere else we cover. Jobs here include addresses on The Park, Toll Bar Lane and Loop Road. Neighbouring places we cover include Bythorn (1 mile east), Brington (2 miles east), Hargrave (3 miles south), Covington (3 miles south) and Catworth (3 miles south-east). Larger places within reach include St Neots (13 miles south-east), Huntingdon (12 miles east), Godmanchester (13 miles east), Yaxley (14 miles north-east), Brampton (10 miles east) and Sawtry (9 miles north-east).
Local landmarks in Keyston
Around Keyston, we work in homes near Parish Church of St John the Baptist and White Hart Public House. Other landmarks nearby include Thrapston Chancery Lane (3.6 miles north-west). Green spaces nearby include Titchmarsh Nature Reserve.
Aftercare tips
Aftercare is simple:
- Give the bath a quick rinse after use
- Put a towel in the bath if you are working above it
- Have new chips seen to early
- If an acrylic bath flexes, have its feet adjusted
There’s nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we do, step by step
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and the room is left clean and tidy.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the day after.
How to prepare
- Open a window if you can
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
Getting a price
For a price in Keyston, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
