Cambridgeshire · England
Bath chip & crack repair in Brington, Cambridgeshire
Our repair technicians come to Brington for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A chip where the taps sit
- Cracks in an acrylic bath
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Bath repair in Brington without replacing anything
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Our technicians work on cast iron enamel, roll-top & freestanding and acrylic, and common reasons people contact us are a failed DIY repair that’s discoloured or lifting and snagging damage from a refit.
Big or small, it’s backed by a one-year guarantee.
- Where
- Brington (PE28)
- Area hub
- Cambridgeshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Also in Brington
The process
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Keep children and pets away from the room on the day
- Open a window if you can
- Mention any earlier repairs or resurfacing
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Related advice
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Brington: your questions answered
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Cambridgeshire.
Can a cracked acrylic bath be fixed?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Which areas do you work in?
All of Cambridgeshire, and the rest of the UK. There’s no extra charge for travel.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Put a towel in the bath if you’re working above it
- Make sure an acrylic bath is firm underfoot
- Do not scrub with anything abrasive
- Don’t leave a fresh chip for long
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Brington and nearby
Brington is about 10 miles north-east of Rushden, in Cambridgeshire. Jobs in Brington are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Brington is one of 371 towns and villages in Cambridgeshire where we work. You can also see our page for London, about 62 miles away.
Every address in PE28 is covered, from the main roads to the quietest streets. Local streets include The Green, Hill Place and Church Lane, all of which we cover. We also travel to Bythorn (2 miles west), Catworth (2 miles south), Keyston (2 miles west), Covington (4 miles south-west) and Tilbrook (4 miles south). Further out, we also cover St Neots (12 miles south-east), Huntingdon (10 miles east), St Ives (14 miles east), Godmanchester (11 miles east), Yaxley (12 miles north-east) and Ramsey (14 miles north-east).
Local landmarks in Brington
Around Brington, we work in homes near Brington CofE Primary School and Parish Church of All Saints and the streets around them. Further afield, we also cover the area around Thorpe Waterville Castle (5 miles north-west). Not far away are Shepherd's Close.
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- Whether old repairs or coatings need taking off
- How much damage there is
- How many items we do on one visit
- How easy the damage is to reach
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Common problems we fix in Brington
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
It’s worth getting a quote if you see:
- A chip where the taps sit
- Chips along the edge of the bath
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
What your quote should include
- How long the guarantee is and what it covers
- What aftercare is recommended
- If travel is included in the price
- Whether they match the colour on site
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
