Leicestershire · England
Bath Repair in Kilby Bridge
Bath repair in and around Kilby Bridge: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rust by the waste and overflow
- Deep scratches in acrylic
How we handle bath repair in Kilby Bridge
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for a kit repair that didn’t last and hairline or through cracks in acrylic, on cast iron enamel, whirlpool & spa baths and roll-top & freestanding.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Location
- Kilby Bridge (LE18, LE8)
- Area hub
- Leicestershire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- A year’s guarantee on all work
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- A fixed quote before you book
Take a look at our full price list or guide to resurfacing and replacement costs.
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Also near Kilby Bridge
Other services in Kilby Bridge
Covering Kilby Bridge
Kilby Bridge is about 1 mile south of Wigston, in Leicestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover all 287 towns and villages across Leicestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 34 miles away.
Postcode districts we cover here: LE18 and LE8. Streets in the area include Cooks Lane, Welford Road and Durnford Road, and we cover them all. We also travel to Wigston (1 mile north), Foston (1 mile south), South Wigston (2 miles north-west), Wigston Fields (2 miles north) and Countesthorpe (2 miles south-west). We also work in nearby towns such as Loughborough (15 miles north), Hinckley (11 miles west), Coalville (15 miles north-west), Syston (9 miles north), Shelthorpe (15 miles north) and Lutterworth (9 miles south-west).
Near you in Kilby Bridge
Locally, our jobs take us to homes close to Lucas Marsh, The Horse and Trumpet pub and Abington Academy and the streets around them. Also close by are Church of All Saints (1 mile north), Birkett House School (1 mile north) and Thythorn Field Community Primary School (under half a mile north). The closest station to Kilby Bridge is South Wigston station, about 1.6 miles north-west of the centre. Other landmarks nearby include Kibworth Harcourt Castle (4.7 miles east) and Wigston Folk Museum (0.8 miles north).
Kilby Bridge: your questions answered
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Something went through my bath. Can it be fixed?
Normally. Photos of the hole and the underside help us check.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Keep metal cans and razors off the surface
- Make sure an acrylic bath is firm underfoot
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t scrub with anything abrasive
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
When to call us in Kilby Bridge
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
It’s worth getting a quote if you see:
- Chips caused by builders
- Scratches you can feel with a fingernail
- Rust spots around the plughole
- An old repair that has yellowed or come loose
Comparing quotes
- Aftercare advice
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- What happens if they find more damage
What we cannot put right
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
What happens on the day
We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. Allow a few hours, depending on the damage, and we will tell you if anything changes.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the next day, the bath is ready to use.
Preparing for the visit
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
Get a quote
For a price in Kilby Bridge, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
How we price bath repair
Prices start from £95. You’ll know the full cost before booking. We take into account:
- Any earlier repairs that need removing first
- What the surface is made of
- How many items we do on one visit
- Access to the area
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Quotes from your pictures
You can take the photos on your phone, there’s no need for anything special. Just make sure we can see:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- The material, if you know it
- One sharp close-up of the damage
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
