Sheffield · England

Bath chip & crack repair in Kimberworth, Sheffield

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Kimberworth. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Damage beneath the taps
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Kimberworth

Can I fix it myself?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

How we handle bath repair in Kimberworth

We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. You can typically use the bath the following day. If you’re dealing with rusty patches near the plughole and impact holes in acrylic, we can help, whatever the material.

We stand behind the work with a one-year guarantee.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Where
Kimberworth (S9, S61)
Area hub
Sheffield
Warranty
A year, on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Honest limits

Not everything can be repaired, and we will tell you before we start. Repairs will not solve:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Metal that has corroded all the way through
  • Cracks in acrylic we can’t reach from underneath

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel

Work for landlords and builders

For anyone letting property in or around Kimberworth, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

What we do, step by step

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Getting ready for the visit

  • Ensure the area is dry
  • Keep children and pets away from the room on the day
  • Let us know if it has been repaired before

Ask for a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Get a free quote

Advice

Prices and what affects them

Repairs from £95. Quotes are free and the price is fixed. What we take into account:

  • Previous DIY repairs that have to come out
  • How much damage there is
  • Access to the area
  • Whether we combine several jobs

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Getting a price from photos

Most quotes are done from photos alone. To make it quick:

  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before
  • Any details about the material
  • Good light, ideally daylight, without flash glare

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.

Kimberworth questions

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Will I be able to see the repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

Can you fix rust around the plughole?

Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.

Is there a call-out fee?

There is no separate call-out charge. The fixed price covers the visit and the work.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

How do I book?

Just pictures, your postcode and a contact number. On the day, access to the room.

How do I get a price for bath repair in Kimberworth?

Prices start from £95. Because every job differs, we price from photos. You will get a fixed figure before booking.

Is a bath repair permanent?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

About Kimberworth

Kimberworth is about 2 miles west of Rotherham, in Sheffield. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Kimberworth is one of 118 towns and villages in Sheffield where we work. Our nearest city page is Leeds, about 27 miles away.

Jobs in S9 and S61 are booked in the same way as anywhere else. You’ll find streets such as Barrow Road, Dundas Road and Hill Top Lane, all of which we cover. Kimberworth sits on or near the M1, so getting to you is simple. We also cover the places around Kimberworth: Tinsley (1 mile south), Wincobank (1 mile west), Scholes (2 miles north), Firth Park (2 miles west) and Grimesthorpe (2 miles south-west). We also work in nearby towns such as Sheffield (4 miles south-west), Netherthorpe (4 miles south-west), Upperthorpe (4 miles south-west), West End (5 miles south-west), Walkley (4 miles south-west) and Broomhall (5 miles south-west).

Around Kimberworth

Our customers here include homes close to Blackburn Meadows, The Steel Foundry pub and Church of St Thomas and the streets around them. Other local landmarks include Tinsley Meadows Primary School (0.7 miles south-east), Old Hall School (0.8 miles north) and Winterhill School (0.8 miles north). For rail, the closest station is Meadowhall station, about 0.6 miles south-west of the centre. Further afield, we also cover the area around Doncaster Gate Hospital Rotherham (2.2 miles east) and York And Lancaster Regimental Museum (2.4 miles east). The countryside around Kimberworth includes Greno Woods.

Map of Kimberworth © OpenStreetMap contributors

Signs you need bath repair in Kimberworth

Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

Get in touch if you’ve noticed any of these:

  • Rusty patches near the plughole
  • A chipped rim or side
  • Scratches you can feel with a fingernail
  • Holes from dropped items

Questions to ask before booking

  • Whether cleaning and preparation are in the price
  • How long the guarantee is and what it covers
  • How your room will be protected
  • When it can be used again

How to compare quotes

Aftercare tips

How the surface is treated afterwards matters. Here’s what we suggest:

  • Put a towel in the bath if you are working above it
  • Don’t scrub with anything abrasive
  • Do not leave a fresh chip for long
  • Store metal items away from the bath

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.

A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.