Greater London · England
Bath chip & crack repair in Kingsland, Greater London
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Kingsland. Free, fixed quotes from your photos.
- Repairs from £95
- Rusty patches near the plughole
- Snagging damage from a refit
Prices and what affects them
Prices start from £95. We give every job a fixed price from pictures. These are the things that affect it:
- Where the damage is and how we get to it
- The colour and finish to match
- The size and number of damaged areas
- Doing more than one item at once
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- A clear, close picture of the problem area
- What it’s made of, if you know
- Something in shot to show the size
- Any earlier repairs or coatings
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Bath repair at your home in Kingsland
Most of our bath repairs take a few hours, and you can usually bathe again the day after. You will not need a plumber or tiler, because the bath doesn’t move. Whether it’s a kit repair that didn’t last and rusty patches near the plughole, we can normally put it right.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Kingsland (N1, E8, N16)
- County
- Greater London
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Kingsland
Also in Kingsland
How to look after the repair
So the finish stays in good condition:
- Rinse it down after each bath
- Don’t leave a fresh chip for long
- Stick to mild cleaners and a soft cloth
- Protect the bath with a towel when doing jobs nearby
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
How the visit works
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for a few hours. Before leaving, we tell you how long to leave it and how to look after it.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the day after, the bath is ready to use.
How to prepare
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
Get a quote
For a price in Kingsland, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
Signs you need bath repair in Kingsland
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Most people get in touch when they notice one of these:
- Holes from dropped items
- Rust by the waste and overflow
- Chips caused by builders
- Cracks in an acrylic bath
Comparing quotes
- Whether there are any call-out or travel charges
- What prep work is covered
- Who turns up on the day
- A fixed price, and whether VAT is included
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair won’t do:
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A steel bath rusted through
Send us photos and we’ll tell you honestly.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
Kingsland: your questions answered
How do I get a price for bath repair in Kingsland?
Prices start from £95. We give a fixed price based on pictures of the damage. Send a close-up and a photo of the entire item with your N1 postcode.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
What happens once I’ve sent pictures?
We come back with a fixed quote. There’s no obligation to book.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there’s more, we’ll tell you before starting.
What areas do you cover?
All of Greater London, and the rest of the UK. There’s no extra charge for travel.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Covering Kingsland
Kingsland is about 1 mile north-east of Hoxton, in Greater London. Whether you are in the middle of Kingsland or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Kingsland is one of 764 towns and villages in Greater London where we work.
All of N1, E8 and N16 is covered, from the main roads to the quietest streets. You’ll find streets such as Dove Road, Glebe Road and Ufton Road, all of which we cover. We also cover the places around Kingsland: De Beauvoir Town (1 mile south-west), Dalston (1 mile east), Mildmay (1 mile north-west), Canonbury (1 mile west) and Newington Green (1 mile north-west). Further out, we also cover London (3 miles south), City of Westminster (4 miles south-west), Marylebone (4 miles south-west), Kensington (6 miles south-west), Walthamstow (4 miles north-east) and Hampstead (5 miles west).
Landmarks near Kingsland
Our clients here include homes close to The Prince of Wales pub, Shoreditch Park and Holy Trinity Church of England Primary School, among other places. Other local landmarks include Bishopsgate Institute Special Collections and Archives (1.8 miles south), Kingsland Secondary School (0.5 miles north-east), Hackney New School (within half a mile south) and Holy Trinity Church (within half a mile east). There is a railway station in Kingsland itself: Dalston Junction station. A little further out are Metropolitan Free Hospital (within half a mile south) and Clowns Gallery-Museum (under half a mile east). For a walk, there is St. James's Park Lake and Gillespie Park.
- Other local spots include Stoke Newington (0.8 miles north-west)
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Landlord and trade work in Kingsland
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
