Staffordshire · England
Bath chip & crack repair in Kingstone, Staffordshire
Our repair technicians come to Kingstone for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Rust spots around the plughole
- Chips on the rim or sides
About our bath repair in Kingstone
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We work on acrylic, cast iron enamel and whirlpool & spa baths, and the jobs we see most are scratches you can feel with a fingernail and a kit repair that didn’t last.
You get a one-year guarantee, the same in Kingstone as everywhere else we work.
- Where
- Kingstone (ST14)
- Region
- Staffordshire
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
A repair isn’t right for every job, including:
- Cracks in acrylic we cannot reach from underneath
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Get any new chip repaired before it rusts
- Do not scrub with anything abrasive
- Rinse the bath after use, especially in hard water areas
- Check that an acrylic bath does not move when you stand in it
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Towns and villages near Kingstone
Other services in Kingstone
How we price bath repair
Repairs from £95. You will not pay by the hour. The price is based on:
- The material
- Where the damage is and how we get to it
- Unusual colours or finishes
- How many items we do on one visit
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your photos
Almost every job we do is priced from pictures. This is what we need:
- Where you are, by postcode
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
Upload pictures of the damage and a wider shot of the whole item, and tell us you are in Kingstone, and we’ll reply with a fixed price.
FAQs for Kingstone
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Can you repair a hole in a bath?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
How much does bath repair cost in Kingstone?
Repairs from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item with your ST14 postcode.
How long does the repair take to cure?
Most baths can be used the day after. We’ll tell you the exact curing time when we finish.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Landlords, agents and businesses in Kingstone
We are used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Kingstone and the surrounding area
Kingstone is about 3 miles south-west of Uttoxeter, in Staffordshire. We visit customers in Kingstone, so there’s no workshop to go to. Kingstone is one of 512 places in Staffordshire we cover. Our jobs stretch from Kingstone to Birmingham (27 miles away).
Postcode districts we cover here: ST14. You’ll find streets such as School View, Church Lane and Stonier Drive, all of which we cover. We also cover the places around Kingstone: Loxley Green (1 mile north-east), Leese Hill (1 mile north-west), The Blythe (1 mile south-west), Heatley (2 miles south) and Booth (2 miles south-west). Larger places within reach include Stafford (10 miles south-west), Burton upon Trent (12 miles east), Cannock (12 miles south), Lichfield (13 miles south), Longton (13 miles north-west) and Rugeley (7 miles south).
Landmarks near Kingstone
Locally, our jobs take us to homes close to Talbot First School and Church of St John. For rail, the closest station is Uttoxeter station, about 3.2 miles north-east. Nearby you’ll also find Redfern's Cottage (3 miles north-east) and Chartley Castle (3.2 miles west).
What we do, step by step
Arrival times are agreed in advance, so you are not left guessing. On site, it takes a morning or an afternoon. We leave the room clean and ready to use once it has cured.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the day after.
Preparing for the visit
- Keep a parking space free if you can
- Ensure the area is dry
- Mention any earlier repairs or resurfacing
How to get a price
For a price in Kingstone, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Repairing versus replacing in Kingstone
Many people think a damaged bath means a new one. Generally it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.
Why book with us
- Honest advice, even when it means no job
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
See our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
