Buckinghamshire · England
Bath chip & crack repair in Kingswood, Buckinghamshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Kingswood and across Buckinghamshire. Send pictures for a free, fixed quote.
- Repairs from £95
- Holes from dropped items
- A chip where the taps sit
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How we handle bath repair in Kingswood
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. If you’re dealing with a chipped rim or side and scuffs and scratches in the surface, we can generally put it right, on cast iron enamel, acrylic and roll-top & freestanding alike.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Kingswood (HP18)
- County
- Buckinghamshire
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also in Kingswood
How it works
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take a few hours, and you are welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
- Let us know about parking or access
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
Aftercare tips
To keep it looking its best:
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
How we price bath repair
Prices start from £95. Every quote is fixed and free. What we take into account:
- Doing more than one item at once
- Previous DIY repairs that have to come out
- What kind of damage it is
- What the surface is made of
Our prices are the same across the UK, with no extra for Kingswood. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- Your postcode, so we can check dates
- Something in shot to show the size
- A picture taken from further back
- Any earlier repairs or coatings
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Common questions in Kingswood
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
What happens once I’ve sent pictures?
You’ll get a fixed quote back. You’re under no obligation.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
When we’d advise against a repair
Before booking, it’s worth knowing the limits:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we will say what we think.
What we work on
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
Kingswood and the surrounding area
Kingswood is about 7 miles east of Bicester, in Buckinghamshire. Jobs in Kingswood are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We cover 263 places across Buckinghamshire, from the larger towns to small villages. We work right across the region, from Kingswood to London (46 miles away).
All of HP18 is covered. Local streets include Grendon Road and Kingswood Lane, and we cover them all. We also cover the places around Kingswood: Westcott (2 miles south-east), Quainton (3 miles east), Ashendon (3 miles south), Waddesdon (4 miles south-east) and Wormstone (4 miles south-east). Further out, we also cover Aylesbury (8 miles south-east), Buckingham (9 miles north), Elmhurst (9 miles east), Southcourt (9 miles south-east), Princes Risborough (12 miles south-east) and Haydon Hill (7 miles south-east).
Local landmarks in Kingswood
In Kingswood, that means homes near Grendon Underwood Combined School and The Akeman Inn, among other places. For a walk, there is Upper Ray Meadows.
Common problems we fix in Kingswood
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
The most common problems we’re called about are:
- Holes from dropped items
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
- Rust by the waste and overflow
Comparing quotes
- How to care for the finish
- What prep work is covered
- How your room will be protected
- How long the guarantee is and what it covers
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
