Buckinghamshire · England
Bath chip & crack repair in Westcott, Buckinghamshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Westcott, with a one-year guarantee on every repair.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
Bath repair in Westcott without replacing anything
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. If you’re dealing with a chipped rim or side and scuffs and scratches in the surface, we can normally put it right, whatever the material.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Where
- Westcott (HP18)
- Region
- Buckinghamshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Keep metal cans and razors off the surface
- Stick to mild cleaners and a soft cloth
- Rinse it down after each bath
- If an acrylic bath flexes, have its feet adjusted
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
What we cannot put right
A repair is not right for every job, including:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Repairing versus replacing in Westcott
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- CHAS and Constructionline accredited
- No need to remove anything
- A fixed quote before booking
- We leave the room as we found it
Read our prices page or bath cost comparison.
Westcott: your questions answered
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
How do I book?
Send photos through the quote form or call 0345 017 0787.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
When can I have a bath again?
Typically within a day, depending on the repair.
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Let us know if it has been repaired before
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Read more
Where we work around Westcott
Westcott is about 6 miles west of Aylesbury, in Buckinghamshire. Whether you are in the middle of Westcott or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 263 places in Buckinghamshire, from the larger towns to small villages. We work right across the region, from Westcott to London (about 44 miles away).
Our visits in HP18 are booked in the same way as anywhere else. From High Street, Lower Green and Ashendon Road or anywhere nearby, we can come to you. We also cover the places around Westcott: Waddesdon (1 mile east), Wormstone (2 miles east), Ashendon (2 miles south-west), Kingswood (2 miles north-west) and Upper Winchendon (2 miles south-east). Within a short drive, we also cover Aylesbury (6 miles east), Buckingham (10 miles north), Elmhurst (6 miles east), Southcourt (7 miles south-east), Princes Risborough (10 miles south-east) and Haydon Hill (5 miles east).
Landmarks near Westcott
In Westcott, that means homes near Westcott Church of England School, Church of St Mary and Waddesdon Church of England School and the streets around them. The nearest railway station is Aylesbury Vale Parkway station, roughly 4.2 miles east of the centre. Further afield, we also cover the area around St John's Hospital (4.6 miles south-east) and Dinton Castle (4.4 miles south-east). Not far away are Upper Ray Meadows.
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Common problems we fix in Westcott
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
Typical reasons for a call-out include:
- Scuffs and scratches in the surface
- Holes from dropped items
- Rust spots around the plughole
- Snagging damage from a refit
What your quote should include
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Other services in Westcott
About our accreditations · Every repair comes with a one-year guarantee.
