Highland · Scotland
Bath Repair for Kinlochmore homes
Our repair technicians come to Kinlochmore for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips on the rim or sides
- Rust spots around the plughole
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Bath repair at your home in Kinlochmore
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, typically in a single visit. We work on whirlpool & spa baths, cast iron enamel and pressed steel enamel, and common reasons people contact us are a chip where the taps sit and chips along the edge of the bath.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Kinlochmore (PH50)
- Area hub
- Highland
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Work done at your home or business
- No need to remove anything
- Typically one visit, start to finish
See our prices page or guide to resurfacing and replacement costs.
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your photos, we will talk to you before going ahead.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the following day, the bath is ready to use.
Before we arrive
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Ensure the room can be ventilated
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Towns and villages near Kinlochmore
More services for Kinlochmore
Where we work around Kinlochmore
Kinlochmore is in Highland. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We cover 253 places in Highland, from the larger towns to small villages. We work right across the region, from Kinlochmore to Glasgow (65 miles away).
Our visits in PH50 work the same way as everywhere else we cover. From Kearan Road, Lochaber Road and Lochaber Crescent or anywhere nearby, a technician can come to you. If you’re just outside Kinlochmore, we cover Kinlochleven (1 mile south), Glencoe (6 miles south-west), Ballachulish (7 miles south-west), Blarmachfoldach (7 miles north-west) and Fort William (9 miles north-west). Remote and island addresses take a little more planning, so call us to arrange it.
Landmarks near Kinlochmore
In Kinlochmore, that means homes near Kinlochleven, among other places. Open spaces near Kinlochmore include Loch Eilde Mòr.
FAQs for Kinlochmore
Can you repair a crack in an acrylic bath?
Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do you come to Kinlochmore?
We do. We send a technician to Kinlochmore for every job, with no extra charge for travel.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Do you need bath repair in Kinlochmore?
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Keep an eye out for these signs:
- A kit repair that didn’t last
- Rust by the waste and overflow
- Holes from dropped items
- Scratches you can feel with a fingernail
What your quote should include
- Whether the colour is mixed to match
- Who turns up on the day
- What happens if the damage is worse than the pictures show
- When it can be used again
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- Cracks in acrylic we can’t reach from underneath
- A steel bath rusted through
Send us pictures and we will tell you honestly before booking.
Materials we work on in Kinlochmore
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Give the bath a quick rinse after use
- Avoid scourers, wire wool and gritty cream cleaners
- A dripping tap stains enamel, so fix it early
- Protect the bath with a towel when doing jobs nearby
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Housing associations and facilities teams use us for planned and reactive repairs in Highland and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
