Dumfries and Galloway · Scotland

Bath Repair in Kippford

Bath repair for Kippford, without a refit. Send us photos for a fixed quote, then we come to you.

  • Repairs from £95
  • Cracks in an acrylic bath
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Kippford

How we handle bath repair in Kippford

Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. If you’re dealing with scuffs and scratches in the surface and chips on the rim or sides, we can help, whatever the material.

Big or small, you get the same one-year guarantee in Kippford and across Dumfries and Galloway.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Where
Kippford (DG5)
Region
Dumfries and Galloway
Cover
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

Repairing versus replacing in Kippford

Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Typically one visit, start to finish
  • CHAS, Constructionline and SafeContractor accredited
  • Colour mixed on the day to match
  • Everything repaired in place

See our full price list and resurfacing vs replacement cost guide.

How it works

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which usually takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the following day.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Avoid using the area for a few hours before we arrive
  • Open a window if you can

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.

Send photos for a quote

Advice

DIY kit or professional repair?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What bath repair costs

Repairs from £95. We charge the same across the UK, including Kippford. The price reflects:

  • The size and number of damaged areas
  • Previous DIY repairs that have to come out
  • The colour and finish to match
  • Doing more than one item at once

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Good pictures mean an accurate price. Here’s what we find most useful:

  • Daylight if possible, and no flash reflection
  • The material, if you know it
  • Where you are, by postcode
  • A picture taken from further back

To get a price, send two or three photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Work for landlords and builders

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

For anyone letting property in or around Kippford, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.

When a repair isn’t the answer

To be straight with you, some problems need a different fix:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • Flexing caused by a failed cradle or loose feet
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send pictures and we will say what we think.

What we work on

  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel

Signs you need bath repair in Kippford

Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Customers usually contact us about:

  • A cracked acrylic bath
  • A failed DIY repair that’s discoloured or lifting
  • A chip where the taps sit
  • Deep scratches in acrylic

What to look for in a quote

  • Who will actually do the work
  • Is the price fixed, and does it include VAT?
  • What protection goes down before work starts
  • What prep work is covered

How to compare quotes

Kippford: your questions answered

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

How long before I can use the bath?

Usually the following day. We will tell you the exact curing time when we finish.

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

Is the work guaranteed?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Will the price change on the day?

The price is fixed for what the pictures show. If there’s more, we will tell you before starting.

How do I get a price for bath repair in Kippford?

Prices start from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before and we’ll plan for it.

Our work in Kippford

Kippford (Gaelic: Scaur) is about 15 miles south-west of Dumfries, in Dumfries and Galloway. We travel to clients in Kippford and nearby villages, so nothing has to leave your home. We work in 138 places across Dumfries and Galloway. We work right across the region, from Kippford to Glasgow (70 miles away).

We cover every part of the DG5 postcode area. That includes homes on The Warren, Quarry Road and Merse Way and the roads around them. We also cover the places around Kippford: Palnackie (1 mile north-west), Rockcliffe (2 miles south-east), Auchencairn (4 miles south-west), Dalbeattie (4 miles north) and Gelston (5 miles north-west). Larger places within reach include Dumfries (15 miles north-east), Kirkcudbright (10 miles west), Troqueer (15 miles north-east), Gatehouse of Fleet (15 miles west) and Castledykes (15 miles north-east).

Around Kippford

A little further out are Orchardton Tower (1.4 miles west) and Dalbeattie Museum (3.6 miles north). Green spaces nearby include Duff's Loch.

Map of Kippford © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.