Dumfries and Galloway · Scotland

Bath Repair for Kirkcudbright homes

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Kirkcudbright. Free, fixed quotes from your photos.

  • Repairs from £95
  • Rusty patches near the plughole
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Kirkcudbright

What we do, step by step

There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a few hours, tidy-up included.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, usually the next day.

Preparing for the visit

  • Let us know about parking or access
  • Keep children and pets away from the room on the day
  • Tell us about any previous repairs or coatings

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.

Get a fixed quote

Related advice

Bath repair at your home in Kirkcudbright

We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. We are frequently asked to fix rust spots around the plughole and a cracked acrylic bath, on acrylic, cast iron enamel and whirlpool & spa baths.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Location
Kirkcudbright (DG6)
Area hub
Dumfries and Galloway
Cover
A year, on every repair
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026

Repair or replace: which is better?

Many people think a damaged bath means a new one. Normally it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Why book with us

  • Typically one visit, start to finish
  • Colours mixed by hand to suit your surface
  • CHAS and Constructionline accredited
  • Same prices wherever you are

Read our prices page or guide to resurfacing and replacement costs.

How we price bath repair

Prices start from £95. There is no charge for travel to Kirkcudbright. The price comes down to:

  • The material and finish
  • Previous DIY repairs that have to come out
  • The colour and finish to match
  • What kind of damage it is

What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.

Send pictures for a quote

We price nearly every job from photos. This is what to send:

  • A wider photo showing the whole bath
  • Natural light rather than flash
  • Where you are, by postcode
  • A coin beside the damage so we can judge size

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

How to care for the repair

Looking after the surface is easy:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Store metal items away from the bath
  • Put a towel in the bath if you’re working above it
  • Clean with warm water and a mild detergent

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.

Kirkcudbright: your questions answered

Can pets and children be at home?

Keep pets and children away from the work area on the day.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Can you redo someone else’s repair?

Usually, yes. The old repair comes out first.

How much does bath repair cost in Kirkcudbright?

Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before booking.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Our work in Kirkcudbright

Kirkcudbright is about 24 miles south-west of Dumfries, in Dumfries and Galloway. Customers in Kirkcudbright get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Kirkcudbright is one of 138 towns and villages in Dumfries and Galloway where we work. You can also see our page for Glasgow, about 71 miles away.

All of DG6 is covered, from the main roads to the quietest streets. That includes homes on High Street, Old Gas Lane and St Mary Street and the roads around them. Main roads around Kirkcudbright include the A711 and A755, so getting to you is simple. Neighbouring places we cover include Tongland (2 miles north-east), Twynholm (2 miles north-west), Dundrennan (5 miles south-east), Gatehouse of Fleet (6 miles north-west) and Bridge of Dee (6 miles north-east). Further out, we also cover Dalbeattie (11 miles north-east), Castle Douglas (9 miles north-east) and Creetown (14 miles west). Kirkcudbright is among the bigger towns we cover in Dumfries and Galloway.

Local landmarks in Kirkcudbright

In Kirkcudbright, that means homes near Masonic Arms, Kirkcudbright Parish Church and Kirkcudbright Academy. Further afield, we also cover the area around Kirkcudbright Castle (0.5 miles west) and Kirkcudbright Hospital (less than half a mile south). Open spaces near Kirkcudbright include Trostrie Loch and Newlaw Hill.

Map of Kirkcudbright © OpenStreetMap contributors

When to call us in Kirkcudbright

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.

People usually call us after spotting something like this:

  • Cracks in an acrylic bath
  • An old repair that has yellowed or come loose
  • A chip where the taps sit
  • Chips along the edge of the bath

Comparing quotes

  • What protection goes down before work starts
  • If travel is included in the price
  • How long it needs to cure
  • Whether the colour is mixed to match

How to compare quotes

When we’d advise against a repair

Before you book, it’s worth knowing the limits:

  • A steel bath rusted through
  • Leaking fittings, which need a plumber
  • Cracks in acrylic we cannot reach from underneath

Send us photos and we’ll tell you honestly.

Materials we repair

  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.