Dumfries and Galloway · Scotland

Bath chip & crack repair in Tongland, Dumfries and Galloway

Our technicians come to Tongland for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • A kit repair that didn’t last
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Tongland

What we are called out for in Tongland

Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

You may need us if you’ve spotted any of these:

  • A hole punched through by something heavy
  • Deep scratches in acrylic
  • Snagging damage from a refit
  • A failed DIY repair that’s discoloured or lifting

Questions to ask before booking

  • How long it needs to cure
  • Whether they match the colour on site
  • What the guarantee covers, and for how long
  • What happens if they find more damage

How to compare quotes

Bath repair in Tongland without replacing anything

Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We work on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding, and people most often call us about deep scratches in acrylic and rust spots around the plughole.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Area
Tongland (DG6)
Region
Dumfries and Galloway
Warranty
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

How the visit works

We agree an arrival time beforehand, so you know when to expect us. On site, it takes two to three hours for most chips for most jobs. The room is left tidy and you’ll know when it can be used.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the day after.

How to prepare

  • Point us to the nearest place to park
  • Ensure the room can be ventilated
  • Mention any parking restrictions or tricky access

Getting a price

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.

Send photos for a quote

Advice

Why repair rather than replace?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.

Why Tongland clients choose us

  • Work done at your home or business
  • Accredited with CHAS, Constructionline and SafeContractor
  • No need to remove anything
  • Colours mixed by hand to suit your surface

Read our full price list and guide to resurfacing and replacement costs.

Tongland: your questions answered

Do you repair coloured baths?

Yes, coloured baths are no problem. We tint the finish to your bath on site.

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.

Can I get a quote without a visit?

Usually, yes. Clear pictures let us give you a fixed price without visiting.

What happens once I’ve sent pictures?

We review the pictures and send a fixed quote with dates.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Can pets and children be at home?

Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.

I tried a repair kit. Can you fix it?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

About Tongland

Tongland is about 22 miles south-west of Dumfries, in Dumfries and Galloway. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. We work in all 138 towns and villages in Dumfries and Galloway, from the larger towns to small villages. You can also see our page for Glasgow, about 69 miles away.

Our visits in DG6 work the same way as everywhere else we cover. Local streets include Monks Way and Culdoach Road. Neighbouring places we cover include Kirkcudbright (2 miles south-west), Twynholm (2 miles west), Bridge of Dee (4 miles north-east), Kelton Hill (5 miles north-east) and Dundrennan (5 miles south-east). Within a short drive, we also cover Dalbeattie (10 miles north-east), Castle Douglas (7 miles north-east), Gatehouse of Fleet (6 miles west) and Creetown (14 miles west).

Landmarks near Tongland

We visit homes around Tongland Parish Church and Kirkcudbright Academy and the streets around them. A little further out are The David Coulthard Museum (1.7 miles west) and Kirkcudbright Hospital (2.1 miles south-west). Not far away are Newlaw Hill and Trostrie Loch.

Map of Tongland © OpenStreetMap contributors

Keeping it looking good

To keep it looking its best for years:

  • Don’t leave razors or cans standing in the bath
  • Make sure an acrylic bath is firm underfoot
  • Get any new chip repaired before it rusts
  • Clean with warm water and a mild detergent

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.

Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

For landlords and businesses

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

What a repair cannot fix

Not everything can be repaired, and we’d rather say so up front. We can’t fix:

  • A bath that moves underfoot, until its support is fixed
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Acrylic cracks with no access behind them

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Tongland

  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel

How we price bath repair

Prices start from £95. We give every job a fixed quote from pictures. These are the things that affect it:

  • The material and finish
  • Access to the area
  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

How to get a fixed price

Good photos mean an accurate price. Here’s what helps:

  • A coin or ruler next to the damage for scale
  • A wider photo showing the whole bath
  • A clear, close picture of the problem area
  • Your postcode, so we can check dates

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.