Kirklees · England
Bath Repair in Kirkheaton
Bath repair in Kirkheaton without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
What a repair cannot fix
A repair isn’t always the answer, and we’ll tell you before we start. We cannot fix:
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
About our bath repair in Kirkheaton
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Common call-outs are for a kit repair that didn’t last and deep scratches in acrylic, on acrylic, roll-top & freestanding and cast iron enamel.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Kirkheaton (HD5)
- Region
- Kirklees
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Kirkheaton
More services for Kirkheaton
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
What you get with us
- Normally one visit, start to finish
- We will tell you if it’s not worth repairing
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing or resurfacing vs replacement cost guide.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Rinse the bath after use, especially in hard water areas
- Protect the bath with a towel when doing jobs nearby
- Check that an acrylic bath doesn’t move when you stand in it
- Use a soft cloth and washing-up liquid for everyday cleaning
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Signs you need bath repair in Kirkheaton
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
Contact us if you’ve noticed:
- Damage done while the bathroom was being fitted
- Holes from dropped items
- A chip where the taps sit
- Deep scratches in acrylic
Before booking anyone
- What happens if the damage is worse than the pictures show
- Whether the colour is mixed to match
- Who will actually do the work
- Whether cleaning and preparation are in the price
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
Kirkheaton and nearby
Kirkheaton is about 2 miles south-west of Mirfield, in Kirklees. Across the HD5 area, we come to you. Kirkheaton is one of 189 places in Kirklees we cover. You can also see our page for Leeds, about 13 miles away.
Our technicians cover all of HD5 and the streets around it. You will find streets such as St John's Avenue, Town Road and St John's Road. If you’re just outside Kirkheaton, we cover Upper Heaton (1 mile north), Upper Hopton (1 mile east), Gawthorpe Green (1 mile south-east), Gawthorpe (1 mile south) and Rawthorpe (1 mile west). Within a short drive, we also cover Huddersfield (3 miles west), Dewsbury (4 miles north-east), Batley (5 miles north-east), Liversedge (4 miles north), Cleckheaton (4 miles north) and Heckmondwike (4 miles north-east).
Near you in Kirkheaton
Typical jobs here are in homes near The Spangled Bull pub, Kirkheaton Primary School and Netherhall Learning Campus High School. For rail, the closest station is Deighton station, roughly 1.2 miles north-west of the centre. Further afield, we also cover the area around Kingsgate Shopping Centre (2.3 miles south-west) and Automobilia Transport Museum (2 miles west). Green spaces nearby include Castle Hill.
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we take into account:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- How much damage there is
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send pictures for a quote
You can generally get a fixed quote without us visiting. To make it quick:
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- One picture of the entire bath
- Any details about the material
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will say immediately whether it can be repaired.
Your questions about bath repair in Kirkheaton
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
How long before I can use the bath?
Normally the following day. We confirm the time before we leave.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Repairs by material
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
What happens on the day
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take a few hours, depending on the damage, and you’re welcome to carry on with your day while we work.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
Get a quote
Email us a photo of the damage and a wider shot of the entire item, and tell us you’re in Kirkheaton, and we’ll reply with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
