Lincolnshire · England
Bath Repair for Kirton End homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Kirton End. Send pictures for a free, fixed quote.
- Repairs from £95
- Rust by the waste and overflow
- A chip where the taps sit
About our bath repair in Kirton End
A typical bath repair is a few hours’ work, and the bath is back in use the next day. You will not need a plumber or tiler, because nothing is disconnected. Typical jobs include chips on the rim or sides and holes from dropped items, across whirlpool & spa baths, pressed steel enamel and cast iron enamel.
All our work is covered by a one-year guarantee.
- Location
- Kirton End (PE20)
- County
- Lincolnshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
What affects the price in Kirton End
Repairs from £95. You will not pay by the hour. The price depends on:
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- How many areas need work
- The material
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
To get a price, send a couple of photos through our quote form or call us. We will say right away if a repair is the right fix.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Clean with warm water and a mild detergent
- Put a towel in the bath if you are working above it
- Make sure an acrylic bath is firm underfoot
- Rinse it down after each bath
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Our work in Kirton End
Kirton End is about 3 miles south-west of Boston, in Lincolnshire. Wherever you are in the PE20 postcode area, we carry out the work at your property. We work in 732 places across Lincolnshire.
We work across PE20 and the streets around it. We regularly work on streets such as Holmes Lane, Donington Road and Whitebread Road. Close by, we cover Frampton West End (1 mile east), Kirton (1 mile south-east), Frampton (2 miles south-east), Wyberton (2 miles east) and Skirbeck Quarter (3 miles north-east). We also work in nearby towns such as Boston (3 miles north-east), Spalding (11 miles south), Sleaford (14 miles west), Holbeach (11 miles south-east), Woodhall Spa (15 miles north) and Pinchbeck (10 miles south).
Near you in Kirton End
In Kirton End, that means homes near The Old Windmill pub, Thomas Middlecott Academy and Church of St Michael. For rail, the closest station is Hubberts Bridge station, roughly 2.4 miles north-west of the centre. Other landmarks nearby include Pilgrim Hospital (4.4 miles north-east) and Frampton Castle (2.4 miles east). Green spaces nearby include RSPB Frampton Marsh.
When to call us in Kirton End
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Contact us if you’ve noticed:
- Damage beneath the taps
- Rusty patches near the plughole
- A kit repair that didn’t last
- A hole punched through by something heavy
Questions to ask before you book
- What preparation is included
- Is the price fixed, and does it include VAT?
- Who will actually do the work
- How long it needs to cure
What we do, step by step
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Related advice
Towns and villages near Kirton End
Other services in Kirton End
FAQs for Kirton End
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Is there a call-out fee?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do you cover the whole of Lincolnshire?
The entire UK, including all of Lincolnshire. Just include your postcode and we will confirm dates.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
What information do you need?
Use the quote form or ring 0345 017 0787.
Repairing versus replacing in Kirton End
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
What you get with us
- Nothing taken out or refitted
- We leave the room as we found it
- One-year guarantee on every repair
- Fixed prices from your photos
Take a look at our full price list or bath cost comparison.
Honest limits
In fairness, there are a few things a repair won’t fix:
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send pictures and we will say what we think.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
